Mark I don't need any adult diapers!!
Richard
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Guzzi car pics. https://www.slantsix.org/forum/viewtopic.php?t=47421 |
Page 3 of 5 |
| Author: | madmax/6 [ Sat Jan 07, 2012 8:13 pm ] |
| Post subject: | |
His Depend diapers will take up some of the space,but will add some weight,more so 1/4 track when they would bee full.Mark |
|
| Author: | Fopar [ Sat Jan 07, 2012 8:36 pm ] |
| Post subject: | |
Mark I don't need any adult diapers!! Richard |
|
| Author: | madmax/6 [ Wed Jan 11, 2012 9:56 pm ] |
| Post subject: | |
Got 3 lbs out of passenger door and hinges today.Got 3 nitrous bottled filled and bottle heater in and wired.Got to sort weak rear brakes,and put aluminum panels on right side of car,think my test and tune will bee in two or three weeks.I predict a sub 7.00 first pass with a 60 shot.Guzzi Mark |
|
| Author: | Dart270 [ Thu Jan 12, 2012 6:26 am ] |
| Post subject: | |
Fast.... Faster.... Fastest......  Lou 
|
|
| Author: | madmax/6 [ Thu Jan 12, 2012 8:06 pm ] |
| Post subject: | |
Found my rear brake issue,I cut too much off the ring on my backing plates.Getting flex that is not holding rear brakes enough.In search of backing plates for a 10 inche drum 8.75 rear end,drums are 2 inch wide.ANY help finding these will bee apreciated.Mark |
|
| Author: | Dart270 [ Fri Jan 13, 2012 6:02 am ] |
| Post subject: | |
Go to discs with alum calipers? Lou |
|
| Author: | Greg Ondayko [ Fri Jan 13, 2012 12:44 pm ] |
| Post subject: | |
Quote: Go to discs with alum calipers?
I wonder if the Weight Savings of the aluminium calipers / rotors would make up for the fact that the discs would drag somewhat and you can adjust the Drums for almost no drag??? Lou 
|
|
| Author: | madmax/6 [ Fri Jan 13, 2012 6:39 pm ] |
| Post subject: | |
Clamping power with disc is not as good cold as drums. |
|
| Author: | Big T [ Fri Jan 13, 2012 8:33 pm ] |
| Post subject: | |
MArk.... I think SOON... Your going to need a CHUTE!!! |
|
| Author: | Greg Ondayko [ Sat Jan 14, 2012 9:02 am ] |
| Post subject: | |
Quote: MArk.... I think SOON... Your going to need a CHUTE!!! I think He has 30MPH to go...The rules state 150+ for a Chute.. Also Mark would not like the extra weight that a chute, brakets, cables add to the car... Greg |
|
| Author: | Dart270 [ Sat Jan 14, 2012 9:11 am ] |
| Post subject: | |
Plus it would probably split the car in half when he deployed it...  I still like discs.Lou |
|
| Author: | madmax/6 [ Sat Jan 14, 2012 6:58 pm ] |
| Post subject: | |
No chute,I dont want to go close to that fast in that car,,,my butt hole goes tight at about 110 mph.I am actually a little scared going for the A nitrious mph record at 125 mph.Butt I gotta try.Mark |
|
| Author: | madmax/6 [ Sat Jan 14, 2012 7:10 pm ] |
| Post subject: | |
Would go discs if I went trans brake,but then I would have to change to Cal tracks or different springs,and and and.Going to leave it alone till I feel threatened.Mark |
|
| Author: | Dart270 [ Sun Jan 15, 2012 5:10 am ] |
| Post subject: | |
You're a very sensible guy, Mark. Yeah, right...  Lou |
|
| Author: | wvenable [ Sun Jan 15, 2012 12:03 pm ] |
| Post subject: | He's a superfreak.....superfreaky! |
Lou, you are right! Nothing sensible about this guy. Total nut-job freak! He needs keyboarding lessons so we can read more of his freakadelic posts! I almost said typing lessons but that would have dated me. Mr. Mark keep it comin'!
|
|
| Page 3 of 5 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|