| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Buzzin' Half Duzzin' sold https://www.slantsix.org/forum/viewtopic.php?t=61414 |
Page 30 of 52 |
| Author: | slantzilla [ Wed Dec 25, 2019 10:19 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Mike and Blaine did it years ago. The rack is inside the stock K frame. We are just refining it some. Rick will be lobbying for a race at US 41 for next summer. Date will be determined when we make sure we're not going to conflict with anyone. |
|
| Author: | Rob Simmons [ Thu Dec 26, 2019 6:41 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Sweet!! |
|
| Author: | slantzilla [ Wed Jan 01, 2020 8:29 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Spent some more time at Patrick's today. He had the new mounts built for the rack. He has also milled out a couple threaded adjusters for preventing the wheels from flopping too far when backing up. Next trip down we should get it finished. I also have a couple minor things to do to the motor and I'm ready for the season. |
|
| Author: | Dart270 [ Thu Jan 02, 2020 3:49 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Super. We'll be listenin' for the buzzin'! Lou |
|
| Author: | slantzilla [ Sun Jan 12, 2020 9:37 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
![]() Old tie rod ![]() New tie rod. Patrick also moved it below the steering arm to help Ackermann and bump steer. |
|
| Author: | Rob Simmons [ Mon Jan 13, 2020 9:13 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
That's Mo Better! I'm sure it was fine, but those tie rods made me... nervous... |
|
| Author: | slantzilla [ Mon Jan 13, 2020 3:09 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Mike admitted they weren't optimum. Just making little improvements here and there. |
|
| Author: | slantzilla [ Sat Jan 25, 2020 4:20 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Finished up the mechanicals on the steering today. Patrick is going to do an alignment, then it's back to my shop. Brought home my 5.38 gears today too. Trying to decide if I want to use them or my 4.86's. Decisions, decisions. |
|
| Author: | Rob Simmons [ Sun Jan 26, 2020 9:22 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
5.38... That's a purdy tall gear... I s'pose that big money racin' yer gonna be doin' is 1/8th mile... |
|
| Author: | slantzilla [ Sun Jan 26, 2020 11:24 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Yep. |
|
| Author: | Greg Ondayko [ Sun Jan 26, 2020 6:12 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
5.38 Greg |
|
| Author: | slantzilla [ Sun Jan 26, 2020 8:57 pm ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
I am really leaning toward the 5.38's, but I think with the 4.86 I could still leg it through a 1/4 mile without driving over the crank...... I watched the tach across the stripe at Joliet last year and I was only turning 5200ish. Right now with 4.10's I go through the trap in the 1/8th in 2nd gear. |
|
| Author: | Greg Ondayko [ Mon Jan 27, 2020 2:28 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Makes sense if you want to do 1/4 and 1/8 mile without the gear swaps. Of course the 5.38's would really make the half duzzin be buzzin'. Greg |
|
| Author: | Dart270 [ Mon Jan 27, 2020 4:22 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Remember, this car has tall tires. 30", Dennis? Lou |
|
| Author: | slantzilla [ Mon Jan 27, 2020 10:33 am ] |
| Post subject: | Re: Buzzin' Half Duzzin' sold |
Yes, a 9X30 radial slick. I am also thinking about a 10X31 radial. |
|
| Page 30 of 52 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|