Slant Six Forum
https://www.slantsix.org/forum/

Street "Ruster" Duster - ChumpCar anyone..? :-)
https://www.slantsix.org/forum/viewtopic.php?t=43881		 Page 4 of 13
Author:  slantzilla [ Fri Feb 24, 2012 3:15 pm ]
Post subject: 
Well, then quit flappin' your yap and make me an offer. :roll:

You'd be amazed how cheap you could get it. :lol:

I want more for the rear ladder bars/coil-overs/housing than the rest of the car anyway. :shock:
Author:  wvenable [ Fri Feb 24, 2012 4:09 pm ]
Post subject: 
Do it Mater! Then I can have Chase race your Duster with his Demon and he too can have the pleasure of kickin' yer arse. 8)
Author:  slantzilla [ Fri Feb 24, 2012 4:21 pm ]
Post subject: 
Easy now Tiger, we got to get him to quit flaapin' his yap first. :lol: :lol:

I guess this is just some more of his "RE-FOCUSING" :lol: :lol: :lol: :lol:
Author:  Rob Simmons [ Sun Feb 26, 2012 10:46 am ]
Post subject: 
Quote:
Well, then quit flappin' your yap and make me an offer. :roll:

You'd be amazed how cheap you could get it. :lol:

I want more for the rear ladder bars/coil-overs/housing than the rest of the car anyway. :shock:
I'd love to have it, but wouldn't I have to get rid of GodsRods Duster II before moving on to GodsRods Duster III? :? Did Big Daddy have different versions of the Swamp Rat running at the same time? I heard Don was in the hospital with a mild stroke recently... :(

I already have a set of ladder bars and a narrowed housing with axles... :wink: I think you said the mounts were still there to run leaf springs though anyway, right?

Looks like we need to "talk again"... :lol:
Quote:
Do it Mater! Then I can have Chase race your Duster with his Demon and he too can have the pleasure of kickin' yer arse.
I'll believe it when I see it. :roll: Andrew and Chase have both already been down a dragstrip in Jr. Dragsters and Chase has raced in an autocross with the SRT-4... :wink:

We've already got plenty of options to whoop up on you AND your boy! :twisted:

You want a piece of any of the Simmons Clan, you just get something,... ANYTHING ready to race and we'll be more than happy to put you back in your place. :wink:
Quote:
Easy now Tiger, we got to get him to quit flaapin' his yap first.

I guess this is just some more of his "RE-FOCUSING"


That's right Bagel! You'd better put a leash on yer boy there! :shock:

I'm still FOCUSED! I just like lots of options. :lol:

I'm a highly trained tactician that knows the benefits of having multiple options to defeat an enemy. :twisted:

(BTW: I had Mike come over to the garage yesterday afternoon and help me get those doors on the GodsRods Duster! :lol: )
Author:  Dart270 [ Mon Mar 05, 2012 9:16 am ]
Post subject: 
After my first 24hrs of LeMons race, this could be a real possibility. It was fun beyond belief and I could see building a Slanted A-body to compete. $500 is a joke. There were plenty of ~$5-8k cars out there under all the spray paint. This thing already has a rollbar, right? Thinkin'...

Lou
Author:  Rob Simmons [ Mon Mar 05, 2012 11:46 am ]
Post subject: 
Yep, it has a nice 8 point chromoly roll bar. We may need to add the additional bars to make it a full roll cage if that is what is required (or the right thing to do! :shock: )

I talked to Ben at the ICH Swap Meet Saturday and he said the Safe T Cap frame sections from Auto Rust Technicians is what he used on the back. That front section is $170 plus shipping and the labor to have it installed correctly.

I would LOVE to do this! :D
Author:  Rob Simmons [ Wed Mar 07, 2012 4:46 am ]
Post subject: 
There may be enough chatter, interest and parts between folks in VA, KY, IN and IL to actually make something happen with this thing after all! :shock:

http://slantsix.org/forum/viewtopic.php?t=47907
Author:  CNC-Dude [ Wed Mar 07, 2012 9:41 am ]
Post subject: 
Quote:
Well, then quit flappin' your yap and make me an offer. :roll:

You'd be amazed how cheap you could get it. :lol:

I want more for the rear ladder bars/coil-overs/housing than the rest of the car anyway. :shock:
Got any pics of it.
Author:  Rob Simmons [ Wed Mar 07, 2012 10:39 am ]
Post subject: 
Quote:
Quote:
Well, then quit flappin' your yap and make me an offer. :roll:

You'd be amazed how cheap you could get it. :lol:

I want more for the rear ladder bars/coil-overs/housing than the rest of the car anyway. :shock:
Got any pics of it.
I think I have some in some older emails,... But I've got dibs! :lol:
Author:  CNC-Dude [ Wed Mar 07, 2012 2:37 pm ]
Post subject: 
Just curious as to what the car looks like more than anything.
Author:  slantzilla [ Wed Mar 07, 2012 4:38 pm ]
Post subject: 
Car is pretty much as bare '76 Duster shell. It has had rocker and quarter patch panels (Year One parts) installed, mini-tubbed, 10 point bar, and has the mounts for an Alston ladder bar setup in it. Spare tire well was cut out and we have a fabbed up floor that will accomodate a fuel cell and be legal.

I have the fenders and doors. Fenders need work, doors have the crash bars out of them.

I have an assortment of grilles, and most of the glass.

Sorry, no pics. :D
Author:  Rob Simmons [ Thu Mar 08, 2012 7:12 am ]
Post subject:  Check email
Quote:
Just curious as to what the car looks like more than anything.
I forwarded you an email from Dennis with pics. :wink:

You've got a PM Dennis. :wink:
Author:  CNC-Dude [ Thu Mar 08, 2012 10:11 am ]
Post subject: 
Ok, thanks for the pics. Has a lot of potential from what I can see, should make you a nice racer. So if you get all your race car projects going all at once, and take all of them to the same races, thats one way to rack up a bunch of points and tilt the odds in your favor. :lol:
Author:  Rob Simmons [ Thu Mar 08, 2012 10:53 am ]
Post subject: 
You weren't supposed to tell! :shock: :lol:

Wouldn't that be a hoot to have all four of my boys, my wife and myself all racing at the same event!?

Oh wait! That's Rick Covalt... My Bad! :lol: :lol:
Author:  wvenable [ Thu Mar 08, 2012 4:23 pm ]
Post subject: 
Look Mater, there is simply not enough slant man-power or oatmeal cookies for you ta bring half a dozen nonrunnin' sos (save ole Simmons) cars to the strip! You have CNC-Dude Bamboozled with a capital B.

Is he from GA? :shock: :shock:
Page 4 of 13 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/