Actually, best case is just bearing replacement!
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 225 Slant 6 Engine Help in Central Texas?(75110) https://www.slantsix.org/forum/viewtopic.php?t=46905 |
Page 4 of 4 |
| Author: | Evilsizer [ Fri Nov 25, 2011 10:43 am ] |
| Post subject: | |
been a while since i have picked up a mopar mag but i recall seeing rebuild kits in there for the /6 225. |
|
| Author: | travisschroer [ Fri Nov 25, 2011 1:33 pm ] |
| Post subject: | |
check here i used one of these in a 360 i rebuilt for a friend he has 40k on it now still running great did notice the rings seated fairly fast so im assuming they are soft so expect maybe 80-100k out of the kit before it smokes but for the price http://www.flatlanderracing.com/rebuildkitschrys.html |
|
| Author: | Reed [ Fri Nov 25, 2011 1:57 pm ] |
| Post subject: | |
Rockauto has decent prices and you can piece together exactly what you need. |
|
| Author: | Danarchy [ Sat Nov 26, 2011 9:27 am ] |
| Post subject: | |
I am a RockAuto fan, but I think I am going to try and piece things together from multiple sources. Picking up a compression tester from a friend today, so I'll have a better idea how far I need to go with the rebuild. Worst case I replace everything, Best case I Re-Ring, replace bearings and possibly rods(if damaged?),sundries(gaskets/seals), clean and reassemble. Won't know til I get there. |
|
| Author: | Reed [ Sat Nov 26, 2011 11:19 am ] |
| Post subject: | |
Actually, best case is just bearing replacement!
|
|
| Author: | Danarchy [ Sat Nov 26, 2011 1:27 pm ] |
| Post subject: | |
Quote: Actually, best case is just bearing replacement!
You are correct sir! 
|
|
| Author: | Eatkinson [ Sun Jan 29, 2012 8:13 pm ] |
| Post subject: | |
I just followed your story. How goes it so far? My 63 Dart 225 has just revealed to me a set of possibly similar circumstances, so I'm weighing my options on it right now, wondering exactly where I'll begin. |
|
| Author: | Danarchy [ Sun Jan 29, 2012 8:31 pm ] |
| Post subject: | |
I am going to completely rebuild the 64 Dart GT engine(225), but replace it with another slant I have until I finish it. |
|
| Page 4 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|