| Slant Six Forum https://www.slantsix.org/forum/ |
|
| GodsRods Duster II https://www.slantsix.org/forum/viewtopic.php?t=39102 |
Page 34 of 47 |
| Author: | Rob Simmons [ Sun Apr 29, 2018 11:16 am ] |
| Post subject: | Re: GodsRods Duster II |
This fuel system is really overkill for this mild set up anyway. Maybe I should just grab a stock fuel pump instead. A little re-plumbing and it should work just fine. I’m going to fiddle on something else for a bit now... Either the ‘61 Valiant (several things to work on) or the ‘72 Dart (won’t idle, leaking fuel line at the pump and leaking brake fitting). |
|
| Author: | Dart270 [ Mon Apr 30, 2018 7:01 am ] |
| Post subject: | Re: GodsRods Duster II |
Congrats on the fire up, Rob. Mason-Dixon or Motormile with this car??? Lou |
|
| Author: | Rob Simmons [ Mon Apr 30, 2018 7:30 am ] |
| Post subject: | Re: GodsRods Duster II |
We will see Lou. I'm researching fuel pumps now. I don't need something this big, but will get another decent electric pump. I may want to throw a little laughing gas at this thing someday... Angie suggested she and the boys get me a pair of slicks for my birthday next week. Slicks for the Duster will be cheaper than for the Challenger! |
|
| Author: | Dart270 [ Mon Apr 30, 2018 8:50 am ] |
| Post subject: | Re: GodsRods Duster II |
I support Angie's and the boys' gift idea! Lou |
|
| Author: | sandy in BC [ Mon Apr 30, 2018 8:58 am ] |
| Post subject: | Re: GodsRods Duster II |
Challenger it is! You have such a patient wife. |
|
| Author: | Rob Simmons [ Mon Apr 30, 2018 10:33 am ] |
| Post subject: | Re: GodsRods Duster II |
She is very patient, indeed. |
|
| Author: | Rick Covalt [ Mon Apr 30, 2018 4:52 pm ] |
| Post subject: | Re: GodsRods Duster II |
If it will help you get a car down the track I will give you my Nitto Extreme Drag radials I just took off my car. they are almost slicks |
|
| Author: | Rob Simmons [ Mon Apr 30, 2018 7:25 pm ] |
| Post subject: | Re: GodsRods Duster II |
Yeah,... I’m pricing slicks now... $194 each for M/T 28X9X15... |
|
| Author: | Rob Simmons [ Wed May 02, 2018 5:45 pm ] |
| Post subject: | Re: GodsRods Duster II |
I dug out the ancient Holley blue fuel pump that originally came with the Duster way back in 200... I don’t remember when. It had been sitting in a bucket of parts and didn’t work... I took it apart tonight and it actually seems okay. It looks like it had just been sitting and the shaft stuck. When I put power to it, it acted like the motor wanted to turn. I now have the shaft spinning freely, but I’m not sure how to get the brushes installed back into the case. There must be a trick to it... I’ll check YouTube.
|
|
| Author: | slantzilla [ Wed May 02, 2018 6:59 pm ] |
| Post subject: | Re: GodsRods Duster II |
Bend a U out of coat hanger wire to hold the brushes in while you lower the top back on. |
|
| Author: | Rob Simmons [ Thu May 03, 2018 4:16 am ] |
| Post subject: | Re: GodsRods Duster II |
I’ll give that a try. Thanks. |
|
| Author: | Rob Simmons [ Thu May 03, 2018 1:50 pm ] |
| Post subject: | Re: GodsRods Duster II |
Quote: If it will help you get a car down the track I will give you my Nitto Extreme Drag radials I just took off my car. they are almost slicks
Thanks, but I'll come up with sumthin'... I took another look at the M/T street radials I ran back when I raced it the last time (2012-13?)Those are down to the cords too.The slicks are just a tad taller than the ET streets, which will probably be good for the Duster. It tends to run out of steam toward the top of the 1/4 mile. Lou challenged me to a grudge match, so I s'pose I'd better clean up my act a bit... |
|
| Author: | Rob Simmons [ Fri May 04, 2018 11:16 am ] |
| Post subject: | Re: GodsRods Duster II |
I ordered new M/T 28X9-15 slicks and a new Carter fuel pump and filter for the Duster today. Just because... |
|
| Author: | Rob Simmons [ Sun May 06, 2018 9:25 am ] |
| Post subject: | Re: GodsRods Duster II |
I stopped by Ace Signs & Graphics Friday. They were able to find the old files with the names and graphics. Dale Givan was Michael’s 4-H Marksmanship and Archery leader. He is also a professional welder. He welded up a receiver hitch and tow hubs for Stella to tow the Duster. Thanks again Dale! ![]()
|
|
| Page 34 of 47 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|