That will be fine Rob! Thanks so much for all your work! And Angie too!
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Wiseco Big Bore pistons ANOTHER RUN!! https://www.slantsix.org/forum/viewtopic.php?t=68441 |
Page 7 of 8 |
| Author: | Dart270 [ Mon Sep 14, 2026 7:11 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Same here. Thanks again very much! Lou |
|
| Author: | Rob Simmons [ Fri Sep 18, 2026 4:35 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
I have six sets of pistons. Waiting for word back on the last two 3.504 sets. I will bring the pistons and rods to Clay City today and ship the rest. |
|
| Author: | Dart270 [ Fri Sep 18, 2026 4:54 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Super cool! Thanks again and see you soon. Lou |
|
| Author: | Rob Simmons [ Sat Sep 19, 2026 5:56 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
I handed off pistons and rods at Clay City yesterday. I will ship to Mandi and Wayne Hopefully I will get an update from Wiseco soon on the two sets still outstanding. Roll Call: Rick Covalt - 3.504” x 1 Pending Greg Ondayko - 3.504” x 1 Delivered Wayne Venable - 3.485” x 1 Shipped Lou Madsen - 3.485” x 1 Delivered IdahoCarson (FABO) - 3.504” x 1 Pending Matt Deemer - 3.504" x 1 Delivered Rob Simmons - 3.485” x 1 Delivered Mandi Gravatt - 3.485” x 1 Shipped |
|
| Author: | slantzilla [ Sat Sep 19, 2026 7:38 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
You coming back today Rob? I can take Cookie's. We'll be seeing him sooner or later. |
|
| Author: | Rob Simmons [ Tue Sep 22, 2026 5:39 pm ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
I shipped his pistons. Just the two sets pending now. |
|
| Author: | wvenable [ Wed Sep 23, 2026 6:04 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Thanks Mr. Mater! |
|
| Author: | Rob Simmons [ Thu Sep 24, 2026 6:56 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
I just got an email reply from Wiseco: Quote: Good afternoon, Rob,
I leave for WyoTech in the morning, so Angie will ship them when they arrive. Sorry for the delay.
Should be done hopefully this week. Thank you Adam |
|
| Author: | Rick Covalt [ Thu Sep 24, 2026 7:06 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Rob there is no rush on my end. Whenever is fine. I would ask if you don't mind adding insurance on them for me. I'll pay you whatever it cost for the shipping & insurance. Just let me know what it is. Thanks |
|
| Author: | Rob Simmons [ Wed Sep 30, 2026 1:26 pm ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
I just got off the phone with Adam at Wiseco Pistons. Pistons are ready to ship. Angie will ship them when they get there. Postage to PA with $600 insurance will be about $30-35. I’ll let you know when they are on the way. |
|
| Author: | Rick Covalt [ Wed Sep 30, 2026 5:35 pm ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
That will be fine Rob! Thanks so much for all your work! And Angie too!
|
|
| Author: | Rob Simmons [ Fri Oct 02, 2026 11:21 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Pistons arrived today. Angie will get them sent to you with $600 insurance. You don’t owe anything for shipping. You sent me $650, which more than covers it. |
|
| Author: | Rick Covalt [ Fri Oct 02, 2026 3:40 pm ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Sounds great Rob! Thank Angie for us too!
|
|
| Author: | Rob Simmons [ Tue Oct 06, 2026 4:46 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Angie shipped the last two sets of pistons yesterday. Roll Call: Rick Covalt - 3.504” x 1 Shipped Greg Ondayko - 3.504” x 1 Delivered Wayne Venable - 3.485” x 1 Received Lou Madsen - 3.485” x 1 Delivered IdahoCarson (FABO) - 3.504” x 1 Shipped Matt Deemer - 3.504" x 1 Delivered Rob Simmons - 3.485” x 1 Delivered Mandi Gravatt - 3.485” x 1 Received |
|
| Author: | Dart270 [ Tue Oct 06, 2026 4:55 am ] |
| Post subject: | Re: Wiseco Big Bore pistons ANOTHER RUN!! |
Thanks again, Rob. Much appreciated by all of us... Lou |
|
| Page 7 of 8 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|