Slant Six Forum
https://www.slantsix.org/forum/

1972 Dodge Colt
https://www.slantsix.org/forum/viewtopic.php?t=63924
Page 61 of 81

Author:  hyper_pak [ Tue Mar 05, 2024 6:29 pm ]
Post subject:  Re: 1972 Dodge Colt

WJ said after going to EFI engine life life increased 300% on the dyno engines.
Electronic Fuel Injection.
Just saying.

Author:  slantzilla [ Wed Mar 06, 2024 1:38 am ]
Post subject:  Re: 1972 Dodge Colt

Yeah, yeah, that's the ticket! :mrgreen:

Author:  hyper_pak [ Wed Mar 06, 2024 4:43 pm ]
Post subject:  Re: 1972 Dodge Colt

Block is in-between the frame rails.
Of course it takes me a long time to get anything done.
Things that fit last time, don't fit this time.

Author:  Team Green [ Thu Mar 07, 2024 4:43 am ]
Post subject:  Re: 1972 Dodge Colt

Green tape looks good. Green makes stuff go faster!
I am hoping that your shop towel is green and your camera just makes it look yellow.
Good to see you getting stuff done.
Less than 60 days until Mo-Kan.

Jr.

Author:  hyper_pak [ Thu Mar 07, 2024 6:52 am ]
Post subject:  Re: 1972 Dodge Colt

Thanks Jr.
I am thrashing, at least for me.

Author:  hyper_pak [ Thu Mar 07, 2024 10:05 am ]
Post subject:  Re: 1972 Dodge Colt

Plodding along.
Speed part added.

Attachments:
Trans s.JPG
Trans s.JPG [ 40.09 KiB | Viewed 1033 times ]

Author:  slantzilla [ Thu Mar 07, 2024 12:26 pm ]
Post subject:  Re: 1972 Dodge Colt

Is that a speed part because you can take it out and put it in so fast?

Author:  Rick Covalt [ Thu Mar 07, 2024 1:47 pm ]
Post subject:  Re: 1972 Dodge Colt

Quote:
Green makes stuff go faster!
Thanks Mark! Good to know! :D :D I just got two rolls of green duck tape and put two 12" wide stripes down the middle of my car. Figure that has got to be worth a couple tenths! :D

Author:  hyper_pak [ Thu Mar 07, 2024 3:27 pm ]
Post subject:  Re: 1972 Dodge Colt

Quote:
Is that a speed part because you can take it out and put it in so fast?
no, green tape roll

Author:  slantzilla [ Thu Mar 07, 2024 6:03 pm ]
Post subject:  Re: 1972 Dodge Colt

:mrgreen: :mrgreen:

Author:  hyper_pak [ Fri Mar 08, 2024 2:45 pm ]
Post subject:  Re: 1972 Dodge Colt

Head, intake and exhaust installed.

Attachments:
Intake Headers s.JPG
Intake Headers s.JPG [ 67.12 KiB | Viewed 996 times ]

Author:  Will [ Fri Mar 08, 2024 4:24 pm ]
Post subject:  Re: 1972 Dodge Colt

Looking good!!!!!
Will

Author:  Rick Covalt [ Fri Mar 08, 2024 4:50 pm ]
Post subject:  Re: 1972 Dodge Colt

Stan, us brilliant minds think alike. I wrapped all my air horns in green tape too! They will be fast now. :D :D

Author:  slantzilla [ Fri Mar 08, 2024 7:24 pm ]
Post subject:  Re: 1972 Dodge Colt

Great work Driver!

Author:  hyper_pak [ Sat Mar 09, 2024 6:24 pm ]
Post subject:  Re: 1972 Dodge Colt

Goodman rockers on and kinda adjusted.
I added shims on the side of the rockers to the bolt retainers/spacers.
I didn't want aluminum riding on the steel.
Have a few more issues, but the hand grenade only has to live for one time run.

Attachments:
Goodman Rockers s.jpeg
Goodman Rockers s.jpeg [ 62.19 KiB | Viewed 958 times ]

Page 61 of 81 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/