What year, make & model vehicle are we working on??
Do you need a vacuum amplifier or something else?
A little more info would be helpful.
DD
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Help! need vacuum diagram! https://www.slantsix.org/forum/viewtopic.php?t=10044 |
Page 1 of 1 |
| Author: | nflm65 [ Sat Aug 07, 2004 11:13 am ] |
| Post subject: | Help! need vacuum diagram! |
Does anyone have a vacuum diagram with the vacuum amplifier connections? Mine has been capped off in several places. Thanks! |
|
| Author: | Doctor Dodge [ Sat Aug 07, 2004 1:33 pm ] |
| Post subject: | |
What year, make & model vehicle are we working on?? Do you need a vacuum amplifier or something else? A little more info would be helpful. DD |
|
| Author: | nflm65 [ Sat Aug 07, 2004 3:53 pm ] |
| Post subject: | vac diagram info |
Sorry I wasn't clear in my last post. I have a 73 Valiant with a 225 slant,auto trans. I have a vacuum amplifier,but most of the hoses are blocked off. I need to know how it is supposed to be set up. Even a simple clear sketch would do. Any help is appreciated! |
|
| Author: | jumex [ Sat Aug 14, 2004 10:26 pm ] |
| Post subject: | |
i'd need a diagram also...i have a 72 plymouth scamp with a 225 slant six auto...mine is capped off in a lot of places too |
|
| Author: | 70survivor [ Mon Aug 16, 2004 2:58 am ] |
| Post subject: | |
I've not been able to find a vacuum diagram for my 70 Valiant either. I have a Hanes manual but its not in there. Any ideas??? |
|
| Author: | nflm65 [ Mon Aug 16, 2004 4:20 am ] |
| Post subject: | vacuum routing |
Well, So far,according to many on this site,the thing to do is make sure to keep the line from the dist. to the carb and from the carb to the valve cover port and cap the rest.If you don't have to worry about emissions testing this seems to work nicely! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|