| Slant Six Forum https://www.slantsix.org/forum/ |
|
| What should it cost to get my /6 rebuilt? https://www.slantsix.org/forum/viewtopic.php?t=10780 |
Page 1 of 1 |
| Author: | StradSixer [ Thu Oct 28, 2004 6:23 pm ] |
| Post subject: | What should it cost to get my /6 rebuilt? |
My /6 (225) in my 70 dart needs to be rebuilt. I'm going to take it in. What's an approx good price on a rebuild for such an engine? Thanks for the input! |
|
| Author: | /sixtom [ Sat Oct 30, 2004 2:13 pm ] |
| Post subject: | /6 rebuild cost |
One Atlanta area engine rebuilder charges about $1200. A fellow I work with is putting a v6 in a '91. He works for that rebuilder. I asked that question today. |
|
| Author: | CreamedPossum [ Sat Oct 30, 2004 7:48 pm ] |
| Post subject: | |
I had my machine shop do all the machining, install cam bearings, assemble new pistons to rods, and purchase all my bearings, gaskets, and pumps (water and oil), cam. I ended up with a bill of about $1200, but i'm going to do the assembly of the rest of the engine myself. This cost can vary quite a bit depending on where you live. I had machine work done on a set of heads for another engine, that cost me $150, but i was told by others in other parts fo the country, that it could be almost $300. You best bet will be to ask around for a machine shop that has experiece with slant 6s, they will probably treat you better. Nick |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|