| Slant Six Forum https://www.slantsix.org/forum/ |
|
| anyone want to ball park it? https://www.slantsix.org/forum/viewtopic.php?t=10894 |
Page 1 of 1 |
| Author: | slantsickniss [ Sat Nov 13, 2004 7:25 am ] |
| Post subject: | anyone want to ball park it? |
if i take .75 mill off the head and use fel pro head gasket ballpark wise where would my compression be with stock pistons??? |
|
| Author: | GTS225 [ Sat Nov 13, 2004 12:27 pm ] |
| Post subject: | |
Ummmmmm.....do you REALLY mean ".75" ? Keep in mind, .75 is 750/1000's, or 3/4". You won't have anything left for a combustion chamber, it will have cut off all of the gasket surface, and for damn sure, the valves will hit the pistons. Roger |
|
| Author: | Guest [ Sat Nov 13, 2004 2:10 pm ] |
| Post subject: | |
uuuuummmmm i meant 75 thousands thanx |
|
| Author: | 70valiant [ Sat Nov 13, 2004 2:47 pm ] |
| Post subject: | |
75 thousandths or 0.075" with a thick felpro should get you around 9-1 Compression ratio. I took 0.100" off my head and am cranking 150-160psi |
|
| Author: | Guest [ Sat Nov 13, 2004 3:39 pm ] |
| Post subject: | |
Quote: 75 thousandths or 0.075" with a thick felpro should get you around 9-1 Compression ratio.
thanks!I took 0.100" off my head and am cranking 150-160psi thats what im lookin for.. im diggin the valiant,,,sweet |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|