I want to turn my carb (Edelbrock 500) 90* counter-clockwise, so that the primaries are parallel to the engine. I have an Offy intake.
Is there an adapter I can buy for this? I know I could make one, but I don't have time. I also wonder if I could get some heat in it while I'm at it (from the coolant), since I have headers. I'm not overly concerned about the heat 'cause I'm in NoCal.
I have seen many adapters for Q-jets and any 4bbl to any manifold (Mr. Gasket, etc.), but I don't know if these will help me TURN the carb.
I looked for Frank Raso inc., 'cause I heard he had some sort of heat/adapter plate, but I found nothing.

Thanks for the help!

_________________
"Nothing in all creation is hidden from God's sight. Everything is uncovered and laid bare before the eyes of Him to whom we must give account."

Try Raso Enterprises Store. You are right about those other adapters not being able to turn the carb as it is a very limited market.

I have just got a new domain so I will be relocating to www.RasoEnterprises.com in the near future. I've got a Mopar Tech area there too.

Frank