and
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Valve cover baffle https://www.slantsix.org/forum/viewtopic.php?t=12322 |
Page 1 of 1 |
| Author: | Jeb [ Mon Mar 21, 2005 4:53 pm ] |
| Post subject: | Valve cover baffle |
Can somebody please post a picture of the inside of a slant valve cover so I can see what the baffle looks like and how it is positioned in the cover. Need to add a baffle to my new chrome cover. Thanks a lot. |
|
| Author: | NewLancerMan [ Mon Mar 21, 2005 5:33 pm ] |
| Post subject: | |
and
|
|
| Author: | Pyper6970 [ Mon Mar 21, 2005 7:59 pm ] |
| Post subject: | |
If you got the new chrome valve cover from ebay dont waste any time putting it on, just throw it away. I bought the same one and cut the baffles out of a junkyard valve cover, and riveted it in, looked real nice. But 2 months later, the valve cover was leaking like a sieve, nothing but a headache, get a junkyard cover and chrome it, you are better off. 
|
|
| Author: | SlantSixDan [ Mon Mar 21, 2005 8:14 pm ] |
| Post subject: | |
Quote: If you got the new chrome valve cover from ebay dont waste any time putting it on, just throw it away.
Yep, what he said.
|
|
| Author: | moparDuster [ Mon Mar 21, 2005 10:58 pm ] |
| Post subject: | |
funny thing i just got one at the yard in fontana. i was trying to get a picture to ask what your it came off. Got it from a van not sure of the year it looks like the one in the picture in the post with the long breather neck and a metal pcv valve. what year could it be and what type of breather do i get. |
|
| Author: | SlantSixDan [ Tue Mar 22, 2005 7:33 am ] |
| Post subject: | |
Stant SO-61 oil cap/breather. |
|
| Author: | Jeb [ Tue Mar 22, 2005 3:53 pm ] |
| Post subject: | |
Thanks guys, and by the way, I did'nt buy my cover from E-bag. Bought from a guy who sold chrome valve covers at a car show. |
|
| Author: | SlantSixDan [ Tue Mar 22, 2005 3:58 pm ] |
| Post subject: | |
Probably the same cruddy Chinese cover, though. See This thread. |
|
| Author: | Jeb [ Tue Mar 22, 2005 5:21 pm ] |
| Post subject: | |
The guy I bought this thing from had two slant valve covers. One was chrome and the other was powder coated blue. How can I tell if it is a cruddy chinese imitation? |
|
| Author: | NewLancerMan [ Tue Mar 22, 2005 5:27 pm ] |
| Post subject: | post some pics |
i'm sure dan can spot it a mile away  MJ |
|
| Author: | SlantSixDan [ Tue Mar 22, 2005 5:29 pm ] |
| Post subject: | |
No baffles = almost certainly cruddy Chinese. Post a picture or two or three. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|