| Slant Six Forum https://www.slantsix.org/forum/ |
|
| ProLine Fuel https://www.slantsix.org/forum/viewtopic.php?t=12654 |
Page 1 of 1 |
| Author: | jay5may [ Sat Apr 16, 2005 9:20 pm ] |
| Post subject: | ProLine Fuel |
just when i can get the money pro line is out of business.  do any one know if this is for ever. or just till they get some thing worked out.? do any one have a tween carb setup for the /6 i can buy or know where i can by one?? i alway dreams of my 67 dart with tween carbs. i just hope it will not stay a dream 
|
|
| Author: | Rob Simmons [ Sun Apr 17, 2005 3:34 am ] |
| Post subject: | |
Chris has some family health concerns that he is dealing with right now. The ProLine Fuel thing had to get set aside for awhile. I'll ask him if he knows of another source for you. |
|
| Author: | Charrlie_S [ Sun Apr 17, 2005 5:04 am ] |
| Post subject: | |
You can buy the offie 2 carb manifold. It comes, for use with the stock 1 bbl carbs. You can either use these carbs, or modify the manifold yourself, for twin 2 bbls or the Webbers. What was nice about the proline setup, was Chris did all the mods. |
|
| Author: | jay5may [ Sun Apr 17, 2005 6:10 pm ] |
| Post subject: | |
I hope Chris family work out. ill pray for his family. I am working on my 1967 dart cov. by sep, i should be mostly finished with the car. the last thing ill do is rebuild the /6. may be by the grace of God every thing will work out for Chris & his Family. if there is anything i can do let me know. ( mark5express@msn.com ) ill be waiting to see what happens. |
|
| Author: | NewLancerMan [ Sun Apr 17, 2005 9:31 pm ] |
| Post subject: | Link to offy manifold |
http://www.offyparts.com/product_info.p ... 862c614fab Here's where you can get the manifold. Be prepared for a wait--they aren't cranking these things out all that often. Mine took 4 months to come in. MJ |
|
| Author: | Charrlie_S [ Mon Apr 18, 2005 4:29 am ] |
| Post subject: | |
Also check with Summit Racing. They don't list it in their catalog, but can get them. |
|
| Author: | slantzilla [ Mon Apr 18, 2005 7:16 am ] |
| Post subject: | |
IIRC, Chris also had problems with Weber and getting new carbs. 
|
|
| Author: | jay5may [ Mon Apr 18, 2005 7:40 am ] |
| Post subject: | |
the Dual intake Manifold look cool, but if i get. how do i set it up? where do i go & get the new cabs? or just use the old /6 carbs? & will it run as good as pro lines? |
|
| Author: | LASwinger70 [ Mon Apr 18, 2005 10:58 am ] |
| Post subject: | |
About Weber availability. Weber Carbs use to be made in Italy, due to labor issues they moved to Spain. now in Spain the workers wre demanding decenmt pay so the Weber factory is relocating again. This has made it hard for even Redline, the #1 distibutor of Weber products in the US, to get any new product. |
|
| Author: | 69Fastback [ Mon Apr 18, 2005 2:27 pm ] |
| Post subject: | |
I think Redline might sell the dual Weber setup, although I'm not sure. They also sell the triple sidedraft one with Webers. |
|
| Author: | dc_mopar [ Fri Jan 10, 2014 1:58 am ] |
| Post subject: | |
I know this is a really old post, but has anyone heard from Chris regarding re-opening Proline Fuel? or selling intakes under any other name? Thanks, Doug |
|
| Author: | Joshie225 [ Fri Jan 10, 2014 8:17 am ] |
| Post subject: | |
http://www.piercemanifolds.com/ProductD ... Code=K9121 These do not appear to be the same (small) carbs that Proline was offering, but a more sophisticated carb. Call Pierce and ask what you get. The slow moving stuff doesn't get much web site attention. |
|
| Author: | Rick Covalt [ Fri Jan 10, 2014 2:00 pm ] |
| Post subject: | |
Boy, they look cool but they are pretty hard on the wallet too! 
|
|
| Author: | SlantSteve [ Fri Jan 10, 2014 2:08 pm ] |
| Post subject: | |
The adaptor plates wouldn't do you any favours with filter to hood clearance either,in an early model it gets pretty tight for the front carb. They don't look like progressive carbs either,in my book those twin progressive webers mentioned in another post is a great deal,and they sound like they work well with a slant,I think an inline 6 chev parts supplier has them? was it Langdon Stovebolt? they are a really good price as well...I wish I knew of them earlier,but I bought a set of rebuilt genuine progressive throttle webers and a second hand Offy intake, eventually the intake will get welded and machined to bolt the webers directly onto it.....all I need is time! |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|