http://i7.photobucket.com/albums/y281/lauchlin/part.jpg
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Need to id a 225 https://www.slantsix.org/forum/viewtopic.php?t=14021 |
Page 1 of 1 |
| Author: | brent [ Sat Aug 13, 2005 9:09 pm ] |
| Post subject: | Need to id a 225 |
Need a new rear seal and want to id block be for I start. Got the motor from a wrecker, said it was a 80 or 81. Is there any way of telling the years apart. Thanks |
|
| Author: | Doctor Dodge [ Sat Aug 13, 2005 9:16 pm ] |
| Post subject: | |
All the rear seals should be the same, 1960-86 Slant Six Look for the ID number stamped into the top of the block, that will tell use what year the engine was assembled. DD |
|
| Author: | brent [ Sat Aug 13, 2005 9:24 pm ] |
| Post subject: | 225 rear seal |
There is a listing for two seals one for 80 and down and one for 81 to 86 two diffrent part numbers |
|
| Author: | SlantSixDan [ Sun Aug 14, 2005 8:19 am ] |
| Post subject: | |
Donno whose catalogue you're looking in. There's a different whole-engine gasket set for '60-'80 vs. '81-up, because the head gasket's different, but the rear main seal is the same. |
|
| Author: | brent [ Sun Aug 14, 2005 2:11 pm ] |
| Post subject: | rear seal part numbers fel-pro |
http://i7.photobucket.com/albums/y281/lauchlin/part.jpg
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|