Saw this one at "mopars at the strip" in las vegas.
Probably not the pic your looking for, but interesting.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Lookin for a blower picture.............. https://www.slantsix.org/forum/viewtopic.php?t=14041 |
Page 1 of 1 |
| Author: | olddaddy [ Mon Aug 15, 2005 5:35 pm ] |
| Post subject: | Lookin for a blower picture.............. |
I had a really great picture of a slant/6 with a blower on it on my computer. Well the computer died from a virus and I lost the picture. My recollection is that it was a black and white shot with a 671 type blower on it shot from the front of the engine. Anybody got a copy they might share? |
|
| Author: | Slant6Rat [ Mon Aug 15, 2005 8:05 pm ] |
| Post subject: | |
Well, this is a site I had saved that shows a slant blower setup but its not a great one: http://www.inliners.org/rides/rides16.html |
|
| Author: | Lars [ Mon Aug 15, 2005 11:50 pm ] |
| Post subject: | |
Quote: Well, this is a site I had saved that shows a slant blower setup but its not a great one:
Wow that's a cool site! Ironically I was thinking the other day how cool it would be to see an old rod like that with a slant in it...
http://www.inliners.org/rides/rides16.html |
|
| Author: | Charrlie_S [ Tue Aug 16, 2005 5:59 am ] |
| Post subject: | |
Robert does have the roaster, running and on the road. I have seen the car in person, and it was built in the style of the 1940's and 1950's. Everything is home built. He comes on this site once in a while. |
|
| Author: | MileHighDart [ Tue Aug 16, 2005 1:12 pm ] |
| Post subject: | |
Saw this one at "mopars at the strip" in las vegas. Probably not the pic your looking for, but interesting.
|
|
| Author: | Dart270 [ Tue Aug 16, 2005 2:55 pm ] |
| Post subject: | |
Did that guy run in the Slant race? I don't recognize that setup at all. Thanks, Lou |
|
| Author: | vynn3 [ Tue Aug 16, 2005 2:55 pm ] |
| Post subject: | |
I WANT that set-up!!!!!! What a clean install! Any idea what that blower is off of? A T-Bird SC? VM |
|
| Author: | zedpapa [ Tue Aug 16, 2005 6:51 pm ] |
| Post subject: | blower |
i guess you would have to have a lift-off hood with a big cowl induction. zedpapa |
|
| Author: | kesteb [ Tue Aug 16, 2005 10:10 pm ] |
| Post subject: | |
It looks like a GM Eaton M62. The problem with a drawthru carb setup is that the rear rotor bearings are not sealed. The gas washes out the grease, and bye bye bearings. Also if this blower has the teflon coating on the rotors, the raw fuel will eventually eat that away. |
|
| Author: | Tom Drake [ Wed Aug 17, 2005 4:01 am ] |
| Post subject: | |
Quote: The problem with a drawthru carb setup is that the rear rotor bearings are not sealed. The gas washes out the grease, and bye bye bearings. Also if this blower has the teflon coating on the rotors, the raw fuel will eventually eat that away.
You also have a combustible mixture in the supercharger...one mis-fire and BOOOM. 
|
|
| Author: | Dart270 [ Wed Aug 17, 2005 7:16 am ] |
| Post subject: | |
EFI or bust...  Lou |
|
| Author: | Tom Drake [ Wed Aug 17, 2005 7:40 am ] |
| Post subject: | |
| literally!
|
|
| Author: | MileHighDart [ Wed Aug 17, 2005 7:45 am ] |
| Post subject: | |
Heres another pic of it. Try to ignore my brothers head in the picture ! lol I dont think the guy ran the car, not as far as I know anyway. It had no hood on it and i dont know how you could have one. I believe its a 64 or 65 dart. 
|
|
| Author: | Dart270 [ Wed Aug 17, 2005 8:59 am ] |
| Post subject: | |
66 Dart. Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|