You need the center section that goes along with the adapter. Here is a picture of a kit that I used to make to mate a slant to a SB tranny.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| slant 6 / 727 tranny https://www.slantsix.org/forum/viewtopic.php?t=14716 |
Page 1 of 1 |
| Author: | caveman [ Sun Oct 16, 2005 4:16 pm ] |
| Post subject: | slant 6 / 727 tranny |
has anyone out there successfully mated a slant 6 with a 727 tranny that originally had a V8? I got a hold of the bellhousing adapter but cant see how the flex plate can bold up to the crank without some sort of spacer, once the the bellhousing adapter is on. I am dealing with a 1970 slant six and a 1965 727 tranny. |
|
| Author: | 64 Convert [ Sun Oct 16, 2005 5:06 pm ] |
| Post subject: | |
When the adapters were part of the factory taxi/police package, they came with the small block converter and flex plate. The flex plate adapter consisted of qty 6, p/n 2202472. |
|
| Author: | Eric W [ Sun Oct 16, 2005 7:09 pm ] |
| Post subject: | |
If your in the Seattle area, I have a slant specific 727 for sale. |
|
| Author: | andyf [ Sun Oct 16, 2005 8:04 pm ] |
| Post subject: | |
You need the center section that goes along with the adapter. Here is a picture of a kit that I used to make to mate a slant to a SB tranny.
|
|
| Author: | argentina-slantsixer [ Mon Oct 17, 2005 5:24 am ] |
| Post subject: | |
that spacer is nice but expensive!!! I often see on ebay slant 6 727 bellhousings for $150 (you have to gut your old olne and use the parts on the bellhousing) |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|