| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Valiant Symbol....... https://www.slantsix.org/forum/viewtopic.php?t=15553 |
Page 1 of 1 |
| Author: | emsvitil [ Thu Dec 29, 2005 4:49 pm ] |
| Post subject: | Valiant Symbol....... |
Does anyone have (or know where I can find) a .gif,.bmp,.jpg, .whatever of the round Valiant blue & red valiant symbol like the one on the horn? I want to print some smaller versions to put in the middle of the grils of the fans I installed (the fans are my airconditioning  )Thanks |
|
| Author: | sandy in BC [ Thu Dec 29, 2005 5:14 pm ] |
| Post subject: | |
Nope 
|
|
| Author: | mcnoople [ Fri Dec 30, 2005 5:55 am ] |
| Post subject: | |
Find yourself an artist/art student and have them draw you one. It's not exactly a complicated pattern. Or you could find sandy and steal the grimey one from his grille. Sandy if you polished the grille why didn't you shine up that "V" and give it a paint job. |
|
| Author: | SlantSixDan [ Fri Dec 30, 2005 8:07 am ] |
| Post subject: | |
Scan it off an original Valiant brochure, owner's manual, etc. |
|
| Author: | sandy in BC [ Fri Dec 30, 2005 8:08 am ] |
| Post subject: | |
Actually......I didnt use the emblem on my grille....its on a window sill in the shop I think. The grill was never polished....in fact ,,,rarely washed. The emblem I posted was found by searching "Valiant Emblem" on Google. 
|
|
| Author: | mcnoople [ Fri Dec 30, 2005 1:15 pm ] |
| Post subject: | |
Your grille shines much more than mine I just assumed it was a polish job. Does the V from your grille have a circular ring around or is it just the plain V. On my signet (2dr ht) the grille has a hole for a recessed circular emblem (like the one in the post) so the emblem can't be removed without a gaping hole. It looks like you have the normal valiant grille. I removed the grille on mine so I could use a very good condition 64 grille that I had laying around. I always prefered the 64 grille. |
|
| Author: | sandy in BC [ Fri Dec 30, 2005 2:25 pm ] |
| Post subject: | |
Just a plain V.....my grille is stainless ( I think) ,,,,or mebbe good aluminum....it alwys stays shiny. I have a Barracuda grille but I think the stocker sans emblem looks better...I would like the Barracuda turn signals though.... 
|
|
| Author: | slantvaliant [ Fri Dec 30, 2005 2:31 pm ] |
| Post subject: | |
|
|
| Author: | emsvitil [ Fri Dec 30, 2005 3:20 pm ] |
| Post subject: | |
Thanks!!!!! Now if I can just get it to print on my label stock.......... (the label stock paper is really absorbent, and it comes out splotchy and strange) |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|