I can get an NHRA & AHRA approved (B&M or TCI) Flex Plate for a SB and BB Mopar.
Where do I get one for the Slant, AND that will mate up to the 904 in my racer??
Terry
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Slant/6 Flex Plate for 904.... https://www.slantsix.org/forum/viewtopic.php?t=15877 |
Page 1 of 1 |
| Author: | Terencejiminy [ Mon Jan 23, 2006 6:09 am ] |
| Post subject: | Slant/6 Flex Plate for 904.... |
I can get an NHRA & AHRA approved (B&M or TCI) Flex Plate for a SB and BB Mopar. Where do I get one for the Slant, AND that will mate up to the 904 in my racer?? Terry |
|
| Author: | Tom Drake [ Mon Jan 23, 2006 7:17 am ] |
| Post subject: | |
Sorry!  Was too early in the morning for my eyes to be working and I mis-read/understood what you were asking. Maybe I am just going senile!  Tom |
|
| Author: | slantzilla [ Mon Jan 23, 2006 7:53 am ] |
| Post subject: | |
For a flex plate I used a Mopar Performance one for a 340. I had to oblong 1 bolt hole, but that was it. Get the one with the proper bolt holes for your converter.  Cox boys used to sell them pre-modified.
|
|
| Author: | Terencejiminy [ Wed Jan 25, 2006 10:23 am ] |
| Post subject: | NHRA Flex plate for 904 and /6. |
Thanks gang. Sounds like the plan. Terry |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|