anyone know where i can get or have made an ac hose than runs across the valve cover from the compress to the firewall. i was putting freon in mine and the next morning i came out and it had ripped a hole in it.

any help appreciated
dustin

Lots of shops can re-hose A/C lines. Check your local yellow pages.

Is it possible you overcharged the system?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

no we were real careful of that

but it was the og hose and it had the spiderline cracks all over it so i thought i would try it and see what happened

but she was cold that night

ill try some shops later tomorrow

thanks for the quick response

dustin

Try for "barrier hose". If you can't find a shop that'll rehose your lines, post back and we'll get you some recommendations for where you can send your hoses to be reworked.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Here in Texas, it's easy to find shops that make new hoses. However, not all of them stock the fittings you might need. My local NAPA store has the hose and will do the crimping, but the number of fittings they have on hand is limited. We are lucky to have an AC supplier and compressor rebuilder in town and they have a good supply of fittings.

The fittings needed for most of the factory A/C systems in our cars are long since NLA.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

If you need to send the hose out, to get it done, you can send it to me. I have the equipment to repair/rehose, and build new hoses.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225