| Slant Six Forum https://www.slantsix.org/forum/ |
|
| How to Test and Hot Wire a Wiper Motors. https://www.slantsix.org/forum/viewtopic.php?t=16635 |
Page 1 of 1 |
| Author: | imnoisydart [ Sun Mar 19, 2006 9:37 am ] |
| Post subject: | How to Test and Hot Wire a Wiper Motors. |
On my 69 Dart the two speed wiper motor is not working. Fuse is good. Because I'm driving it to Vegas I don't have time to properly fix wiring harness or switch issues yet, but want to hot wire the motor and put in a toggle switch for temporary use on low speed. What terminal (wire color) should I hook positive battery power. Then do I jump to another terminal or do I ground another terminal (or is the motor already grounded to the chassis?) |
|
| Author: | KBB_of_TMC [ Wed Mar 22, 2006 12:08 pm ] |
| Post subject: | wiper wiring |
I don't have the book for '69, but it should be similar to my '71. For a '71 2sp wiper, the two pins closest to the motor feed the motor; the two further away are for the switch. Give 12V to the one w/ the red wire to get high speed; run 12V through the external resistor to the one with the brown wire for low speed. Both require that the ground strap complete the circuit. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|