Slant Six Forum
https://www.slantsix.org/forum/

High priced kickdown
https://www.slantsix.org/forum/viewtopic.php?t=17372		 Page 1 of 1
Author:  Otto [ Tue May 02, 2006 6:50 pm ]
Post subject:  High priced kickdown
Check out the price paid for this kickdown linkage on ebay!http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=8059983111&ssPageName=STRK:MEWA:IT
Author:  Reed [ Tue May 02, 2006 10:18 pm ]
Post subject: 
:shock: Somebody is smoking some serious crack!

It is entirely possible to run a Super six carb using the complete original one-barrel kickdownb linkage. I just did this swap on my brother's van. I will post pictures of it tomorrow. The only thing you have to do is get a piece of metal and drill two holes in it 7.5 inches apart.
Author:  Hyper'72Valiant [ Wed May 03, 2006 12:40 am ]
Post subject: 
:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
Author:  Charrlie_S [ Wed May 03, 2006 5:23 am ]
Post subject: 
Those two bidders, need to be spoon fed, some common sense.
I can't tell if it even has the kick down lever, or just the adjuster on the trans end.
Author:  dakight [ Wed May 03, 2006 5:33 am ]
Post subject: 
Damn! I think it's time for me to start scouring the junk yards for kickdown linkage. A few of those and I could retire!
Author:  MoparNick [ Wed May 03, 2006 8:25 am ]
Post subject: 
That is INSANE! I bought an entire super six setup 8 years ago from a local JY for $30, but at the time I didn't think about needing the kickdown linkage. I'm finally getting around to installing it, but there is no way I would pay that price just for the linkage! Using the one-barrel sounds slick! Thanks Reed! I'll watch for those pics.

-Nick
Author:  Matt Cramer [ Wed May 03, 2006 8:50 am ]
Post subject: 
What are they doing, a chalkmark-correct concors restoration? I thought the Lokar setup is pricey, but this?!?
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/