| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Found - Super Six Kickdown https://www.slantsix.org/forum/viewtopic.php?t=17503 |
Page 1 of 1 |
| Author: | 60 Pioneer [ Wed May 10, 2006 2:59 pm ] |
| Post subject: | Found - Super Six Kickdown |
I checked a local scrap yard for any Slants and found one, in an early 80's Diplomat, I believe. It had a Super Six and it looked like the kickdown linkage was still there and complete. If I call them and tell them that I want it, what all should I get? I know, from reading past forums, that I should get the trans bracket, but what pieces should I get off the carb? Or, should I just get the carb, air cleaner, manifolds and everything back to the trans? I don't plan on using it myself, but i thought that if anyone here had a need for it, I could pick it up and send it to them for my cost and postage. btw, how much should I expect to pay? This is my first foray into the scrap yard to find parts for my Slant. Thanks, Bill |
|
| Author: | Mel Ott [ Wed May 10, 2006 3:24 pm ] |
| Post subject: | Re: Found - Super Six Kickdown |
Quote: I checked a local scrap yard for any Slants and found one, in an early 80's Diplomat, I believe.
You should get all the rods, brackets, ect. from the trans to the carb.It had a Super Six and it looked like the kickdown linkage was still there and complete. If I call them and tell them that I want it, what all should I get? I know, from reading past forums, that I should get the trans bracket, but what pieces should I get off the carb? Or, should I just get the carb, air cleaner, manifolds and everything back to the trans? I don't plan on using it myself, but i thought that if anyone here had a need for it, I could pick it up and send it to them for my cost and postage. btw, how much should I expect to pay? This is my first foray into the scrap yard to find parts for my Slant. Thanks, Bill Everything from where it mounts to the trans to where it attaches to the carb. |
|
| Author: | mopardemon71 [ Fri May 12, 2006 7:51 am ] |
| Post subject: | |
hey if you can get the carb cheep I'll get it from you. I need it to check the rods and jet in the one I have(it maybe a v-8 bbd). |
|
| Author: | 60 Pioneer [ Fri May 12, 2006 10:46 am ] |
| Post subject: | |
Let me see what I can do next week. My tranny's going out on my grocery-getter, so I'm car shopping this weekend. I was actually figuring on getting the works: linkage & brackets, manifolds, carb, and those pesky little washers for the intake/exhaust. I'll let you know if I can score it next week. This place is some what known for being high. How much would be too much for the whole works...anybody? Thanks, Bill |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|