| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 904 or 727? / rear end size https://www.slantsix.org/forum/viewtopic.php?t=17985 |
Page 1 of 1 |
| Author: | Andy's GT [ Fri Jun 09, 2006 5:10 pm ] |
| Post subject: | 904 or 727? / rear end size |
hey, i have a 67 dart gt with automatic transmission it has 1st, 2nd, and drive, would it be a 727 or 904? or is that enough info? also how do i tell what size the rear end is? i also want to tell what size the rear end is on our 73 parts dart thanks guys! |
|
| Author: | Ron Parker [ Fri Jun 09, 2006 5:42 pm ] |
| Post subject: | |
It should be a 904. in 1968 Chrysler introduced the 340 engine i doint know if any 340 engines got in a 67 i have never seen a 67 factory 340 car. The 340 cars got the 727 transmission. Most likely it has a 7 1/4 rearend but it possably could aave a 8 3/4 rearend. To tell the difference look at it if has i think 8 bolts on the back with a cover it a 7 1/4 if it looks round on the back and there are bolts on the front it a 8 3/4. Thanks Ron Parker  It Aint Over Until I Win |
|
| Author: | Andy's GT [ Fri Jun 09, 2006 7:38 pm ] |
| Post subject: | |
thanks ron! it is as i feared, 7 1/4 in my dart and the parts dart.... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|