| Slant Six Forum https://www.slantsix.org/forum/ |
|
| filler tube gasket for early a body? https://www.slantsix.org/forum/viewtopic.php?t=18597 |
Page 1 of 1 |
| Author: | gmader [ Sun Jul 16, 2006 1:42 pm ] |
| Post subject: | filler tube gasket for early a body? |
Hi all, Any good sources or parts numbers for a 65 A body's gas tank filler tube gasket? Thanks, Greg |
|
| Author: | SlantSixDan [ Sun Jul 16, 2006 2:27 pm ] |
| Post subject: | |
Are you after the gasket where the fill pipe seals to the quarter panel, or the seal where the fill pipe goes through the floor and into the tank? |
|
| Author: | gmader [ Sun Jul 16, 2006 3:09 pm ] |
| Post subject: | |
The gasket/seal that mates the junction of the fill tube with the gas tank. It is round, and has a lip in it that fits inside the tank. Thanks, Greg |
|
| Author: | SlantSixDan [ Sun Jul 16, 2006 7:19 pm ] |
| Post subject: | |
Year One has it for $16 under part number BF661. |
|
| Author: | gmader [ Mon Jul 17, 2006 2:11 pm ] |
| Post subject: | |
I found that Harden had it, plus other stuff, cheaper. http://www.hardensmcw.com I really hate getting raped on the shipping from Year One and The Paddock. Thanks for the help on this, Dan. It got me on the right path, and I figured out what the correct name was, and could ask around more. [/list] |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|