No prob!
Not sure on the black... you might just give Summit a quick call and see what they say.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| bed caps https://www.slantsix.org/forum/viewtopic.php?t=18789 |
Page 1 of 1 |
| Author: | LeftClique [ Mon Jul 24, 2006 4:20 pm ] |
| Post subject: | bed caps |
I haven't been able to locate anyone that sells bed caps for pre-1994 Dodge trucks, but it seems like there ought to be some out there that would fit well enough to protect my truck. Any ideas? Thank you. |
|
| Author: | oldgoat83 [ Mon Jul 24, 2006 9:22 pm ] |
| Post subject: | |
You mean the roll out bed covers? Or the fiberglass ones? |
|
| Author: | LeftClique [ Tue Jul 25, 2006 12:56 pm ] |
| Post subject: | |
<< You mean the roll out bed covers? Or the fiberglass ones? >> No, sir. What I'm looking for protects only the top of the bed - where the stake pockets are. They're about four or five inches wide and usually made of thick plastic or diamond plate.[/quote] |
|
| Author: | LeftClique [ Tue Jul 25, 2006 12:57 pm ] |
| Post subject: | |
<< You mean the roll out bed covers? Or the fiberglass ones? >> No, sir. What I'm looking for protects only the top of the bed - where the stake pockets are. They're about four or five inches wide and usually made of thick plastic or diamond plate. |
|
| Author: | OzHemi [ Tue Jul 25, 2006 1:08 pm ] |
| Post subject: | |
Like these ? http://store.summitracing.com/partdetai ... toview=sku |
|
| Author: | LeftClique [ Tue Jul 25, 2006 6:29 pm ] |
| Post subject: | |
<< Like these ? >> Yes, exactly. Thank you very much. Do you know if it's possible to get them in black? |
|
| Author: | OzHemi [ Wed Jul 26, 2006 9:01 am ] |
| Post subject: | |
No prob! Not sure on the black... you might just give Summit a quick call and see what they say. |
|
| Author: | LeftClique [ Thu Jul 27, 2006 1:56 pm ] |
| Post subject: | |
Dang, they don't don't have black, but they suggested searching on Yahoo or Lycos. I'll see if they can beat Google ...... |
|
| Author: | Pierre [ Thu Jul 27, 2006 2:16 pm ] |
| Post subject: | |
If you want them black, you can always scuff them up and shoot them with adhesion promoter + etching primer + paint, or brush on truck bedliner. |
|
| Author: | LeftClique [ Fri Jul 28, 2006 3:57 pm ] |
| Post subject: | |
<< If you want them black >> Thanks, bro, but chrome is beginning to look pretty good. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|