| Slant Six Forum https://www.slantsix.org/forum/ |
|
| /6 intake https://www.slantsix.org/forum/viewtopic.php?t=20347 |
Page 1 of 1 |
| Author: | Robert Deloney [ Thu Oct 19, 2006 7:43 am ] |
| Post subject: | /6 intake |
Greetings Got my /6 rebuilt (73 Duster) had a performance cam and other parts installed which require headers, my question is what about the under side of the intake do I just leave it open or have it weled closed or will it work opened. Thanks in advance |
|
| Author: | Super6 [ Thu Oct 19, 2006 7:51 am ] |
| Post subject: | |
Make and install an EGR blockoff plate, and leave the bottom of the intake open. As long as the EGR is blocked, it will be fine. -S/6 |
|
| Author: | Bentsix [ Thu Oct 19, 2006 9:27 am ] |
| Post subject: | |
What "SUPER 6" said, been running that way for 4 years now, no problems. Good luck! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|