| Slant Six Forum https://www.slantsix.org/forum/ |
|
| adjustable strut rods https://www.slantsix.org/forum/viewtopic.php?t=20676 |
Page 1 of 1 |
| Author: | 66dartgt [ Thu Nov 09, 2006 6:06 am ] |
| Post subject: | adjustable strut rods |
Anyone running adjustable strut rods? If so how do you like them . I am thinking about putting them on my 66 dart . Any thoughts? Thank you Will |
|
| Author: | slantzilla [ Thu Nov 09, 2006 7:45 am ] |
| Post subject: | |
http://board.moparts.org/ubbthreads/sho ... w=1#UNREAD |
|
| Author: | 66dartgt [ Thu Nov 09, 2006 8:11 am ] |
| Post subject: | RE: Adjustable strut rod |
So it is my understanding that you want to get rid of the bushing all together? Will this be ok on the street? I am not worried about spending the $200.00 from Reilly Motorsports |
|
| Author: | slantzilla [ Thu Nov 09, 2006 10:27 am ] |
| Post subject: | Re: RE: Adjustable strut rod |
Quote: So it is my understanding that you want to get rid of the bushing all together? Will this be ok on the street? I am not worried about spending the $200.00 from Reilly Motorsports
I got from Bill's post that he has many of these kits on the street. Bill is one of the few front end guys that can actually tell you what his pieces do and why. 
|
|
| Author: | james longhurst [ Thu Nov 09, 2006 11:39 am ] |
| Post subject: | |
Will- I ran a set on my swinger and had no troubles for the 5-10kmi I drove the car. The only change I made was adding a set of heim joint seals. I never had any poly LCA bushing walk when using them either.  Bill is a great guy to deal with, too. -James |
|
| Author: | 66dartgt [ Thu Nov 09, 2006 12:29 pm ] |
| Post subject: | Stut rods |
I am just concered on running metal on metal at the front . What my understanding is that there is no bushings at all on the k-member |
|
| Author: | Dart270 [ Thu Nov 09, 2006 12:50 pm ] |
| Post subject: | |
No bushings, but they are spherical bearings. Nice setup. Sam Powell also has some miles on a set on his Dart. I have Bill's on my Project V racecar. Lou |
|
| Author: | Walter Lee Jackson [ Thu Nov 09, 2006 9:59 pm ] |
| Post subject: | adjustable strut rods |
Firm Feel makes and sells them: http://www.firmfeel.com/adjstrut.htm They make a set for the A body. --Walt Jackson |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|