As far as the manifold studs go, I just make my own.
Now I know why I saved all those bolts from all the motors I took apart over the years.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| engine rebuild time https://www.slantsix.org/forum/viewtopic.php?t=20732 |
Page 1 of 1 |
| Author: | oibrownskin [ Mon Nov 13, 2006 6:34 pm ] |
| Post subject: | engine rebuild time |
I am having a bit of trouble tracking down some seemingly regular parts for my slant six. I need: Bolts and hardware for the engine, where to buy? Also need new intake and exhaust studs (since a couple were broken off), where can I locate these? Caesar |
|
| Author: | DusterIdiot [ Mon Nov 13, 2006 7:40 pm ] |
| Post subject: | Auto Parts Store |
Quote: Also need new intake and exhaust studs (since a couple were broken off), where can I locate these
These are easy to get in any NAPA or mom and pop store that has a wall of Orange "Dorman" Product bins...I just bought 14 of said studs Saturday at Baxter's Auto Part in Salem (the guy at the counter asked why I would buy them all at once...I had to reply so I have a full set and one spare for next time!) -D.Idiot |
|
| Author: | Brian [ Tue Nov 14, 2006 4:53 am ] |
| Post subject: | |
As far as the manifold studs go, I just make my own. Now I know why I saved all those bolts from all the motors I took apart over the years.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|