Slant Six Forum
https://www.slantsix.org/forum/

I Need Help!!!!!!-re Temp gauge reading
https://www.slantsix.org/forum/viewtopic.php?t=22714		 Page 1 of 1
Author:  pocketrocket [ Sat Apr 14, 2007 9:47 am ]
Post subject:  I Need Help!!!!!!-re Temp gauge reading
VDO Manual Temp guage reads 200-220 smetimes 230 at normal operating. Water at top of Radiator never above 190-195 even after heavy driving, speeds up to 90 for 2-3 miles, driving around the block backwards a few times and stop to wheel spin and then stop etc.. I can see flow during acceleration. Whats going on?????? :cry: :cry: :cry:

Katrina
Author:  slantzilla [ Sun Apr 15, 2007 5:19 am ]
Post subject: 
Where/how is it plumbed into the motor?

I had my Autometer plumbed into the front of the head with some plumbing fittings and it would read 40 degrees or so low until I revved the engine up. :shock:
Author:  pocketrocket [ Sun Apr 15, 2007 10:46 pm ]
Post subject: 
Stock loacation I think. The 1/8" opening near the upper hose above the water pump on the top of the block. :?
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/