If this is the one you're referring to, it was used on the full size cars then as well. If not, I'd be curious to see a picture of the one you do want (when you get it, of course).
Oh yeah, and I have this one if you'd like it.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| '60 valve cover https://www.slantsix.org/forum/viewtopic.php?t=22726 |
Page 1 of 1 |
| Author: | Tim Keith [ Sun Apr 15, 2007 11:33 am ] |
| Post subject: | '60 valve cover |
In Mopar Muscle there is a '60 only valve cover that is "rare", it is not stepped to allow clearance for the '60 heater box as it was only used with the 170 in a Valiant. In '61 the taller 225 required the clearance. Anyone have one of these ? |
|
| Author: | 60 Pioneer [ Sun Apr 15, 2007 4:53 pm ] |
| Post subject: | |
Tim, They used this valve cover on the '60 225 Darts also. These covers have two "risers" on them - one at the front for the breather and one at the back for the road tube. |
|
| Author: | SlantSixDan [ Sun Apr 15, 2007 5:58 pm ] |
| Post subject: | Re: '60 valve cover |
Quote: In Mopar Muscle there is a '60 only valve cover that is "rare"
There is? What's the article on?
|
|
| Author: | VDART [ Sun Apr 15, 2007 6:03 pm ] |
| Post subject: | valve cover |
I have 1 that does not have cut outs for the tabs from the gasket-- it is a little different thant the others I 've collected |
|
| Author: | Old6rodder [ Sun Apr 15, 2007 9:59 pm ] |
| Post subject: | |
If this is the one you're referring to, it was used on the full size cars then as well. If not, I'd be curious to see a picture of the one you do want (when you get it, of course). Oh yeah, and I have this one if you'd like it. |
|
| Author: | SlantSixDan [ Mon Apr 16, 2007 7:39 am ] |
| Post subject: | |
Yep, that is the '60-only valve cover, which was indeed used on all 1960 slant-6 applications (170s in Valiants, 225s in Plymouths and Darts). |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|