| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Collapsible Boundary Layer https://www.slantsix.org/forum/viewtopic.php?t=22920 |
Page 1 of 1 |
| Author: | mpgmike [ Fri Apr 27, 2007 5:17 pm ] |
| Post subject: | Collapsible Boundary Layer |
I think I may have found a way to constrict the ports at lower engine requirements, and have the boundary layer collapse allowing more flow at higher engine demands. I have done some preliminary testing and have the results posted here: http://powrehaus.com/2007/04/27/collaps ... r/#more-40 I'm open for comments and questions. I'd like to see others play with this and perhaps help further develop it into a magnificent tuning tool. Mike |
|
| Author: | SlantSixDan [ Fri Apr 27, 2007 6:17 pm ] |
| Post subject: | |
Awesome, Mike, it's great to see test data. The only question I have at the moment is...where's the "control" data from a head (or just a port) without the power lines? |
|
| Author: | emsvitil [ Fri Apr 27, 2007 6:33 pm ] |
| Post subject: | |
Quote: Awesome, Mike, it's great to see test data. The only question I have at the moment is...where's the "control" data from a head (or just a port) without the power lines?
2 controls 1 no mods 1 normal porting |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|