IIRC, there is a company in Australia that builds them now.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Anyone interested in fabricated aluminum valve covers? https://www.slantsix.org/forum/viewtopic.php?t=23136 |
Page 1 of 1 |
| Author: | Matt Cramer [ Thu May 10, 2007 5:23 pm ] |
| Post subject: | Anyone interested in fabricated aluminum valve covers? |
I've been talking with someone at an aftermarket parts company about some other things, and I thought as long as I have his ear, I might ask if they'd consider tooling up for a line of fabricated aluminum valve covers. These valve covers would be laser cut from sheet aluminum, folded, and welded. I'd be sure to explain the importance of good baffles and making it compatible with a closed PCV system. But before bringing this up, I wanted to see if there was any interest in such a thing. So, would anybody here be interested in buying a fabricated aluminum valve cover if it were a good quality piece and sold for $200 or less? Any particular features you'd want on it? I can't promise I can make this happen, but I wanted to see if anyone was interested, given the shortcomings of many of the aftermarket slant six valve covers. |
|
| Author: | Romeo Furio [ Thu May 10, 2007 6:38 pm ] |
| Post subject: | Valve covers |
I did the same with Jeff Johnston Billet fabrications a few years ago. $800 for 1 or $200 for 20 or more. that was 5 years ago. I would pay $200 for one. Make sure to have clearance for roller rockers. |
|
| Author: | Pierre [ Thu May 10, 2007 8:26 pm ] |
| Post subject: | |
How thick would the sheets be? |
|
| Author: | slantzilla [ Thu May 10, 2007 8:47 pm ] |
| Post subject: | |
IIRC, there is a company in Australia that builds them now.
|
|
| Author: | Matt Cramer [ Sat May 12, 2007 4:57 am ] |
| Post subject: | |
Quote: How thick would the sheets be?
Good question; they'd probably be about the same thickness as the stock stamped steel pan but I hadn't brought that up. I did mention this idea to the company I was talking to, haven't heard back yet. I'll let you know if they do end up making them, if they don't announce it everywhere first.
|
|
| Author: | sick6 [ Mon May 14, 2007 12:11 pm ] |
| Post subject: | |
an oil filler cap would be a nice option. most of the chromed ones I have seen are missing a filler opening. 
|
|
| Author: | Crazy Dart [ Wed Apr 29, 2009 8:28 pm ] |
| Post subject: | |
Quote: IIRC, there is a company in Australia that builds them now.
Slantzilla, can you tell me who the company is? I have googled it and searched this site high and low.
|
|
| Author: | 65 dartman [ Thu Apr 30, 2009 5:27 am ] |
| Post subject: | |
I'd be interested in one depending on the price. |
|
| Author: | Zipper [ Thu Apr 30, 2009 9:53 am ] |
| Post subject: | |
Interesting. I am looking to go away from chrome. ALuminum is better on the heat. Id it has a cool "/6 powered" or "Mopar Powered" or something might be an interesting option, but even just Aluminum I would do |
|
| Author: | runvs_826 [ Thu Apr 30, 2009 7:36 pm ] |
| Post subject: | |
Has anyone considered a valve cover than has a hinge set-up half way up the height of the cover. Essentially you would have to seal the bottom like you normally do, and were the oil can pool on the bottom, than you would have a "door" top half that you can swing open to adjust the valves. Just throwing ideas out. |
|
| Author: | slantzilla [ Fri May 01, 2009 3:05 am ] |
| Post subject: | |
Quote: Quote: IIRC, there is a company in Australia that builds them now.
Slantzilla, can you tell me who the company is? I have googled it and searched this site high and low.
|
|
| Author: | walpolla [ Fri May 01, 2009 4:15 am ] |
| Post subject: | |
Offy ones here (in Oz).CLICK Is that what you were thinking of? regards,Rod
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|