I stumbled across an aluminum two barrel intake while hunting for an uncracked exhuast. Would anyone care to share any experiences with what to look out for on this manifold and what carb would be best to use.
Nino





65' VAL

http://www.slantsix.org/articles/supersix/article.htm
Give this a good read-through, it should answer your questions. Use a Carter BBD, I've had good experiences with them, as have many others.
-Allen

_________________
1962 Valiant V-200
170 C.I. Super Six, HEI, Dutra Duals

Nice , we run across cast ones very few alum. Nothing like loosing a 10 pounds, Better fuel milage, more HP!! Talk to yall soon Don

_________________
'72 Duster /6 with turbo build up
'03 Ram 2500 4x4 w/HEMI 5sp 4:10 posi
My Twister Page

Check the area under the carb for cracks.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.

Before you decide to use it, read this, this, and this.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.