| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Will a 73 225 bolt to a 64 3 speed? https://www.slantsix.org/forum/viewtopic.php?t=23425 |
Page 1 of 1 |
| Author: | Mike_64_Valiant [ Thu May 31, 2007 7:46 pm ] |
| Post subject: | Will a 73 225 bolt to a 64 3 speed? |
I have a 64 valiant with a 225 with a 3 speed and I know the bolt pattern on the cranks changed over one of the years. What i need to know is will a 225 from a 73 swinger with an automatic bolt to my 3 speed manual. I dont remember what years you need the special spacer for if if it even matters with the manual? Thanks Michael |
|
| Author: | Andy's GT [ Thu May 31, 2007 8:08 pm ] |
| Post subject: | |
http://www.slantsix.org/forum/viewtopic.php?p=105056 heres what they told me about the same, although i said 63 and 74, i meant 64 and 73, and i think its the same, good luck! |
|
| Author: | Jeffc [ Thu May 31, 2007 9:15 pm ] |
| Post subject: | |
its not the bolt pattern that changed, it's the crank flange and how it centers and fits the flywheel. 67 is the last year of the small flange, 68 first year of the large flange. So you will need the right 'late' flywheel or have your flywheel made to fit the larger flange. There is a 0.10" differance in the OD (or .05 off each side (radius)) larger on the new from the old. |
|
| Author: | Fireball [ Fri Jun 01, 2007 2:03 am ] |
| Post subject: | |
Furthermore check is there that bushing for manual input axle in the rear of your new crank. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|