I have done it. The hardest part was fabbing up some linkage at the carb. Took me 30 minutes and $4 worth of aluminum pieces from Home Depot.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| kickdown cable? https://www.slantsix.org/forum/viewtopic.php?t=23754 |
Page 1 of 1 |
| Author: | lincparts [ Mon Jun 25, 2007 12:53 pm ] |
| Post subject: | kickdown cable? |
Finding a kickdown linkage to do a super six has been a challenge, so my question is it possible to do with a lokar type cable kickdown? Has anyone done such a thing and how difficult is it? |
|
| Author: | slantzilla [ Mon Jun 25, 2007 3:54 pm ] |
| Post subject: | |
I have done it. The hardest part was fabbing up some linkage at the carb. Took me 30 minutes and $4 worth of aluminum pieces from Home Depot.
|
|
| Author: | lincparts [ Mon Jun 25, 2007 4:41 pm ] |
| Post subject: | pic's?, more info |
hey Slantzilla thanks for the reply, any pic's of it? Do you remember which cable, vender, etc. tring to get my 63 to 2bbl status, and having a rough go , any info appreciated , thanks licparts. |
|
| Author: | Matt Cramer [ Tue Jun 26, 2007 6:25 am ] |
| Post subject: | |
I put on a Lokar linkage, and didn't even bother hooking it up to the carb. I connected it to the gas pedal instead. |
|
| Author: | slantzilla [ Tue Jun 26, 2007 7:27 am ] |
| Post subject: | |
No pics, but it was not too hard to make work. I simply added a flat onto the carb linkage to extend it, and hooked the cable to it. Going to the gas pedal would probably be easier still.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|