| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Engine mount & exhaust clearance..... https://www.slantsix.org/forum/viewtopic.php?t=24495 |
Page 1 of 1 |
| Author: | emsvitil [ Thu Aug 16, 2007 8:50 pm ] |
| Post subject: | Engine mount & exhaust clearance..... |
Was under the car today (oil,filter & lube) and noticed that the exhaust pipe is over the point where the pitman arm connects to the center link and there's hardly any clearance.... (actually looks like there's a designed dent in the pipe for clearance (but no signs of contact )) Is that normal or has the engine mount sagged? (alot or just a little) |
|
| Author: | emsvitil [ Sat Aug 18, 2007 11:20 pm ] |
| Post subject: | |
Bump........ nobody knows how much clearance there should be from the exhaust (or K-member)......   The mounts aren't broke, and I don't have any problem replacing them if needed, but I don't want to replace them and not have anything change........ |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|