Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sun Feb 01, 2026 1:32 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Floor shift swap
PostPosted: Tue Aug 28, 2007 8:19 pm 
Offline
2 BBL ''SuperSix''

Joined: Fri Aug 10, 2007 6:07 pm
Posts: 23
Location: Detroit
Car Model:
Is it possible to re-locate my three speed column shift to the floor? Has anyone ever done this before?

_________________
Customers keep us in work, if there are no customers, there is no work.


Top
   
 Post subject: Yes...and maybe...
PostPosted: Tue Aug 28, 2007 9:00 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
Is it possible to re-locate my three speed column shift to the floor? Has anyone ever done this before?
Yep, you can relocate the shifter to the floor...

You will need a floor hump from a similar year car as yours, and a three speed shifter, shiftrods, and stick/boot/bezel from a floor shift 3 speed car (boot can be from a 4 speed car depending on the year) The thing that would be hard, is some models of 3-speed transmission may not have the 'bosses' to mount the shifter to the tranny body, if this is the case, you will have to either swap in 'that' type of tranny or you would have to make something 'work' to get the shifter mounted right... (or this may be a good time to get that 1st gear synchro A-230 from a 1973 Floorshift Dart).

Next step is figuring out a way to keep the old shift lever from slapping around on the column... (remove it, etc...)

good luck,

-D.Idiot


Top
   
 Post subject:
PostPosted: Tue Aug 28, 2007 11:42 pm 
Offline
TBI Slant 6
User avatar

Joined: Thu Feb 22, 2007 10:45 pm
Posts: 135
Location: Vancouver, WA
Car Model:
I did this to my 73 so that I could get it out of Tex to home.
Used a cheapo Mr Gasket 3sp shifter, work ok for what it was,
didn't need a hump mod, worked for the 2K miles I needed, but would
not recomend it for a driver (or other) in long term use....

Find a OEM sifter and do the tunnel if at all possable....


I cut off the shifter arm with my di-grinder and hung a tac on the other side
as a counter wieght (spring pin would not move to get the arm loose),
curde but efective :lol: :shock: :oops:

_________________
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Belveder A318 727 4d
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4spOD
Old iron or no iron


Top
   
PostPosted: Wed Aug 29, 2007 5:58 am 
Offline
Turbo Slant 6

Joined: Tue Jun 14, 2005 8:29 pm
Posts: 797
Location: Raleigh, NC
Car Model:
Hey!

I stashed the 3 speed floor shifter I took out of my truck when I put in a four speed. You have to make up a stabilixing something to hold it, probably, but so does everyone who installs one. (The require something other than just bolting to a floor like a Promatic shifter for and automatic). PM me and I will give you my old one for the shipping cost.
rock
'64d100


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited