Or make your own.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| EGR Block off plate https://www.slantsix.org/forum/viewtopic.php?t=24690 |
Page 1 of 1 |
| Author: | Aggressive Ted [ Wed Aug 29, 2007 1:13 pm ] |
| Post subject: | EGR Block off plate |
Who sells EGR block off plates? Checked the parts for sale section, none to be found? I would like to purchase one plate and one gasket for my engine. Thanks, |
|
| Author: | Matt Cramer [ Wed Aug 29, 2007 1:15 pm ] |
| Post subject: | |
Usually, the procedure for an EGR blockoff on a slant six is simply to remove the hose from the vacuum diaphragm and cap whatever the other end leads to... |
|
| Author: | Aggressive Ted [ Wed Aug 29, 2007 1:24 pm ] |
| Post subject: | |
Done that........I want to make sure it is not partially stuck in the on position. |
|
| Author: | SlantSixDan [ Wed Aug 29, 2007 2:31 pm ] |
| Post subject: | |
Dealer item, p/n 3671 447, used with standard EGR valve gasket p/n 4173 167. |
|
| Author: | mrhite65 [ Wed Aug 29, 2007 2:58 pm ] |
| Post subject: | |
Or make your own.
|
|
| Author: | SlantSixDan [ Wed Aug 29, 2007 3:05 pm ] |
| Post subject: | |
Recommend using 1/4" (0.250") material, rather than 1/8" (0.125") for flange rigidity and sealing. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|