They still pop up from time to time, but you have to be patient. Also very fast when an ad does appear.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 198 Rods https://www.slantsix.org/forum/viewtopic.php?t=24753 |
Page 1 of 1 |
| Author: | 666VC [ Sun Sep 02, 2007 3:38 am ] |
| Post subject: | 198 Rods |
Could anybody lend a hand to an Aussie mopar-er. Im looking to rebuild the trusty slant and want to use 198 rods. They're like hens teeth over here so im calling out to see if someone on this forum wouldnt mind letting half a dozen go?? Cheers 666VC |
|
| Author: | dakight [ Sun Sep 02, 2007 6:13 am ] |
| Post subject: | |
From what I hear, they are about like rooster's eggs here. I believe most guys are going to custom rods these days. |
|
| Author: | slantzilla [ Sun Sep 02, 2007 6:28 am ] |
| Post subject: | |
They still pop up from time to time, but you have to be patient. Also very fast when an ad does appear.
|
|
| Author: | Slant Cecil [ Sun Sep 02, 2007 8:39 am ] |
| Post subject: | |
There was someone in the Kalamazoo MI area that had some several months ago. They had been reconditioned, ARP bolts installed and the small end had been honed to float the pin (like Doc Dodge did in the Twiggy build up). He wanted $300 at the time. I don't have his contact info any more but I'll PM you has name so you can do a White Pages search and maybe find him. |
|
| Author: | 1974duster kev [ Sun Sep 02, 2007 9:56 am ] |
| Post subject: | |
I've got a 198 engine that i'm pulling out and putting a 225 in. I'm gonna take out the rods see what kinda shape there in and sell it had a knock so a rod might be messed up but we'll see. Kevin |
|
| Author: | 666VC [ Sun Sep 02, 2007 1:11 pm ] |
| Post subject: | 198 Rods |
If its not too much trouble Kevin could you send me a private message when you get round to getting the buggers out. Cheers 666VC |
|
| Author: | ValiantOne [ Sun Sep 02, 2007 1:21 pm ] |
| Post subject: | |
So what could a guy expect to pay today for a decent set of totally stock 198 rods? |
|
| Author: | Joshie225 [ Sun Sep 02, 2007 3:01 pm ] |
| Post subject: | |
Quote: So what could a guy expect to pay today for a decent set of totally stock 198 rods?
About $200 give or take. I've sold a set for $175 and bought a set for $175.
|
|
| Author: | 1974duster kev [ Mon Sep 03, 2007 6:55 pm ] |
| Post subject: | |
Of course i'll message ya i should be yanking the engine this week then we'll see when i get around to yanking the rods because i have to get my car running this blows having no car for school and work. Waiting on parts is a time killer Kevin |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|