http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0153697675
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| slant six any one https://www.slantsix.org/forum/viewtopic.php?t=25093 |
Page 1 of 1 |
| Author: | 68barracuda [ Wed Sep 26, 2007 6:15 am ] |
| Post subject: | slant six any one |
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0153697675
|
|
| Author: | Joshie225 [ Wed Sep 26, 2007 11:00 am ] |
| Post subject: | |
Are those cast crank engines? |
|
| Author: | GTS225 [ Wed Sep 26, 2007 11:33 am ] |
| Post subject: | |
Normally, '76 and up engines are cast crank motors. I can not say for sure about marine duty engines. I notice that both have double roller timing sets. The seller describes them as being rebuilt by Chrysler. Hmmmm? Might it then be possible to get a double roller chain and sprockets from a decent marine parts supplier? Roger |
|
| Author: | ROADRUNNER7169 [ Wed Sep 26, 2007 1:58 pm ] |
| Post subject: | |
looks to me like they are forged crank solid cam(the only thing im going off of is the rib behind the water put pocket thingy and the adjustable rockers) |
|
| Author: | slantasaurus [ Wed Sep 26, 2007 5:11 pm ] |
| Post subject: | |
I wonder if one of these would be reverse rotation ??? |
|
| Author: | GTS225 [ Wed Sep 26, 2007 5:58 pm ] |
| Post subject: | |
Quote: I wonder if one of these would be reverse rotation ???
*****************************************************Now THAT'S a damn good question to ask the seller! Good call Slantasaurus. I also notice that the one on the left is a non-drool tube head. The right one is a five-plug block. I'd guess forged crank, pre-'76, (possibly pre-'80), engines or components "remanned" to marine specs. Can't help but wonder what kind of pistons are inside, though. Roger |
|
| Author: | Rug_Trucker [ Wed Sep 26, 2007 6:19 pm ] |
| Post subject: | |
Shot peened rods? |
|
| Author: | sandy in BC [ Wed Sep 26, 2007 7:32 pm ] |
| Post subject: | |
Reverse rotation....Twin engine 450"V12 dragster? |
|
| Author: | walpolla [ Thu Sep 27, 2007 3:09 am ] |
| Post subject: | |
too much power for you Sandy.  how is the sore finger going?  regards,Rod 
|
|
| Author: | 68barracuda [ Thu Sep 27, 2007 3:32 am ] |
| Post subject: | |
HMMMM I have a FB 69 body sitting around doing nothing 450CID V12 will fit under the glass - a twin slant under glass - mebe 2 turbo's each oh welllll
|
|
| Author: | HyperValiant [ Fri Sep 28, 2007 9:08 pm ] |
| Post subject: | |
Rug,they were married dude,just not to each other. HyperValiant |
|
| Author: | DusterIdiot [ Tue Oct 02, 2007 6:35 pm ] |
| Post subject: | Say wha? |
Quote: It isn't us Slant Six guys who'd have to filch all that welding rod. It's those V-12 engine guys.
Who uses welding rod, that's what headliner bows are for!!!!!! -D.Idiot |
|
| Author: | walpolla [ Mon Oct 15, 2007 3:19 pm ] |
| Post subject: | |
posted in wrong place. sorry. regards,Rod
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|