| Slant Six Forum https://www.slantsix.org/forum/ |
|
| How much flow from headwork? https://www.slantsix.org/forum/viewtopic.php?t=25821 |
Page 1 of 1 |
| Author: | Dan-o [ Mon Nov 12, 2007 3:09 pm ] |
| Post subject: | How much flow from headwork? |
Here's the flowbench results from my head I just got back Friday.  This thing should be interesting. Heads are cc'd at 52cc's, so I'll have about 9.7-9.8:1 ratio with the Ersons 280 cam. Should be peppy. Won't move like the Roadruner, but be more than adequite for a DD. |
|
| Author: | terrylittlejohn [ Mon Nov 12, 2007 4:31 pm ] |
| Post subject: | |
did the flow test stop at .500lift or is that were it maxed out? 
|
|
| Author: | Dan-o [ Mon Nov 12, 2007 4:52 pm ] |
| Post subject: | |
dunno, but i didn't need numbers past that with the cam I'm using |
|
| Author: | Dart270 [ Tue Nov 13, 2007 7:56 am ] |
| Post subject: | |
I assume these are at 28" depression? You are doing pretty well with stock valves, especially at low lifts. Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|