| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Timing - again https://www.slantsix.org/forum/viewtopic.php?t=26150 |
Page 1 of 1 |
| Author: | 68barracuda [ Thu Dec 06, 2007 1:46 pm ] |
| Post subject: | Timing - again |
Hi guys - need some advice I set my timing for total mech of 32 deg @ 2600 following the mopar engines book - I see some of the guys run 32 a@2000 - advice will be appreciated |
|
| Author: | terrylittlejohn [ Thu Dec 06, 2007 3:46 pm ] |
| Post subject: | timing |
when i ran my 10/1comp engine it liked 32deg to be all in at 2500. it`s just the way my setup ran best , 528lift/ 284deg/int&ex 3.90 8 1/4 600cfm vac secondary/3000 stall conv. also no vac advance. |
|
| Author: | Aggressive Ted [ Thu Dec 06, 2007 6:35 pm ] |
| Post subject: | |
My engine likes more timing. It runs best at 32 degrees at 2500. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|