Git a load of the exhaust manifold on the engine that comes with this '69 Charger.
Here's a pic cadged from the auction; click for (much) bigger:
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Speaking of nonstandard fabbed exhaust manifolds... https://www.slantsix.org/forum/viewtopic.php?t=26195 |
Page 1 of 1 |
| Author: | SlantSixDan [ Mon Dec 10, 2007 9:14 pm ] |
| Post subject: | Speaking of nonstandard fabbed exhaust manifolds... |
Git a load of the exhaust manifold on the engine that comes with this '69 Charger. Here's a pic cadged from the auction; click for (much) bigger:
|
|
| Author: | slantasaurus [ Mon Dec 10, 2007 9:32 pm ] |
| Post subject: | |
Looks like the "power pipe" has compitition........ |
|
| Author: | gmader [ Mon Dec 10, 2007 10:01 pm ] |
| Post subject: | |
Now that is an interesting project for the right person. I haven't seen many B-body engine bays with a slant, but I am guessing that it is down right cavernous. There is a lot of room for a better manifold, and a really big turbo in there. |
|
| Author: | Joshie225 [ Mon Dec 10, 2007 10:37 pm ] |
| Post subject: | |
Interesting. The collector is a little wonky, but the fab work doesn't look bad at all. Too bad he chose such a small turbo. Looks like it's from a Turbo II. |
|
| Author: | emsvitil [ Tue Dec 11, 2007 2:27 am ] |
| Post subject: | |
I'm wondering if internally the collector has some flow control so it's not as bad as it seems. (the boxy collector is to make sure there's not any leaks) |
|
| Author: | sick6 [ Tue Dec 11, 2007 4:42 am ] |
| Post subject: | |
that thing looks like its almost welded right to the head isn't it? that flange must be like a quarter inch thick. ack! 
|
|
| Author: | SlantSixDan [ Tue Dec 11, 2007 6:41 am ] |
| Post subject: | |
Quote: I'm wondering if internally the collector has some flow control so it's not as bad as it seems. (the boxy collector is to make sure there's not any leaks)
He who made it states: " I was bored one day and started tinkering. Not real pretty, but for my first attempt, I thought it was good. The center box has a shaped divider in the middle, so the exhaust pulse from #1 doesn't push back on the pulse from #6."
|
|
| Author: | Rug_Trucker [ Tue Dec 11, 2007 7:54 pm ] |
| Post subject: | |
|
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|