| Slant Six Forum https://www.slantsix.org/forum/ |
|
| What should I adjust my valves to? https://www.slantsix.org/forum/viewtopic.php?t=26930 |
Page 1 of 1 |
| Author: | 75plyduster [ Wed Jan 30, 2008 3:45 pm ] |
| Post subject: | What should I adjust my valves to? |
Its a '75 Plymouth Duster with a 225. A 1974 carb and no upgrades besides new exhaust. What should I adjust the intake and exhaust valves to? |
|
| Author: | Doc [ Wed Jan 30, 2008 3:54 pm ] |
| Post subject: | |
.010 on the intakes and .020 on the exhaust... HOT. DD |
|
| Author: | runvs_826 [ Wed Jan 30, 2008 3:56 pm ] |
| Post subject: | |
What about cam increases? If someone were to have 270 duration with .44 lift, I've always heard that you loosen it a little. Does anyone have any advice or numbers? Very much apprecaited. |
|
| Author: | dakight [ Wed Jan 30, 2008 5:20 pm ] |
| Post subject: | |
You would go with the cam grinder's recommendation. I believe they are typically a little looser. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|