| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Slant Six Clutch Fork https://www.slantsix.org/forum/viewtopic.php?t=26995 |
Page 1 of 1 |
| Author: | Cam74 [ Sun Feb 03, 2008 8:34 pm ] |
| Post subject: | Slant Six Clutch Fork |
Hey Everyone, I have a 1985 Dodge Ram 100. It has a 4 Speed Transmission and a Slant Six. Im wondering if the Clutch Fork and everything from how it is now, will work on a 318? I already have the bellhousing and flywheel to convert it. Im sorry its not going to be a slant six anymore. Any help would be great though. Thanks! -Cam- |
|
| Author: | Sam Powell [ Sun Feb 03, 2008 9:04 pm ] |
| Post subject: | |
Those parts on a car are different from slant to 318. Some of them are the same, but many are not. I wish I could speak with certainty. Duster Idiot probably can give you part numbers that are the same by looking in his books. I am pretty sure the fork, and the Z bar are different. The clutch pedal is the same. I am also pretty certain the ball that mounts on the bell housing for the Z bar pivot is different. These parts are pretty readily available for a V-8 however. Year One sells them. The shifters are the same. The flywheel and clutch plate obviously are different too. Sam |
|
| Author: | Cam74 [ Wed Feb 06, 2008 10:24 pm ] |
| Post subject: | |
So i've changed my mind. Im going to be smart and stick with the slant six. Where I live, I havent seen many around, especially any that are going to be a little built up. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|