| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Shifter. https://www.slantsix.org/forum/viewtopic.php?t=27166 |
Page 1 of 1 |
| Author: | justinb [ Wed Feb 13, 2008 1:21 pm ] |
| Post subject: | Shifter. |
Anybody reckon this would work on a '60 Valiant? http://tinyurl.com/2z5cz4 I know Mopar had a bunch of different 3 speeds, and I know the Valiant wouldn't have come with the Heavy Duty 3 speed. But I seem to recall that the differences were internal, perhaps? |
|
| Author: | Doctor Dodge [ Wed Feb 13, 2008 8:50 pm ] |
| Post subject: | |
It is not going to bolt-on and work. With some fabrication and "re-arranging" it could be made to work. There is very little trans tunnel room in the 60-62 A-body cars. The factory used a special bell housing for 60-62 A-body cars with a floor shifter, that bell housing tilted the transmission in order to make room for the floor shifter's linkage rods. DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|