| Slant Six Forum https://www.slantsix.org/forum/ |
|
| tranny options https://www.slantsix.org/forum/viewtopic.php?t=2726 |
Page 1 of 1 |
| Author: | gary [ Wed Oct 03, 2001 6:57 am ] |
| Post subject: | tranny options |
I am looking at buying a 84 1/2ton pickup with a slant six. It has a three speed auto. I am not familiar with mopar. Is there a OD auto tranny that will bolt onto the slant six? Thanks for any help. garysgill@excite.com |
|
| Author: | Craig [ Wed Oct 03, 2001 9:11 pm ] |
| Post subject: | Re: tranny options |
I believe the 4-speed 833 transmission was an option. The automatic probably has a lock-up torque converter. cfield@ll.net |
|
| Author: | Doctor Dodge (Doug Dutra) [ Wed Oct 03, 2001 10:00 pm ] |
| Post subject: | Re: Truck tranny options |
Quote:
: I believe the 4-speed 833 transmission was an : option. The automatic probably has a lock-up : torque converter. Yup, if you go to the trouble to swap to a manual, there is a "bolt-in" 833 OD 4-speed unit. There are some newer Mopar 4-speed automatics with lock-up converters, This may fit under the cross- member of your truck but it does not fit a passinger car, unless you cut-out and re-inforce the cross member area. DD |
|
| Author: | Dart270 [ Thu Oct 04, 2001 8:58 am ] |
| Post subject: | Re: Truck tranny options |
Quote:
: Yup, if you go to the trouble to swap to a : manual, there is a "bolt-in" 833 : OD 4-speed unit. : : There are some newer Mopar 4-speed automatics : with lock-up converters, This may fit under : the cross- member of your truck but it does : not fit a passinger car, unless you cut-out : and re-inforce the cross member area. : DD Note that you need a '60's truck adapter plate (slant six to SB mopar trans) in order to bolt the late model OD autos to your Slant. Lou madsenl@caltech.edu |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|