| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Parking brake lever https://www.slantsix.org/forum/viewtopic.php?t=27273 |
Page 1 of 1 |
| Author: | NewSlanter [ Mon Feb 18, 2008 7:16 pm ] |
| Post subject: | Parking brake lever |
Are the parking brake strut and lever (inside the drum) interchangeable between 9" and 10" brakes? I seem to be missing those parts and the counter guy at the parts store just looks at me with a slack jaw when I ask him if they are available. Even a PN# would be splendid. Thanks in advance, Nat |
|
| Author: | SlantSixDan [ Mon Feb 18, 2008 9:27 pm ] |
| Post subject: | |
No, the 9" and 10" parts don't interchange. Which setup have you got? |
|
| Author: | NewSlanter [ Tue Feb 19, 2008 6:54 am ] |
| Post subject: | |
I have a 7 1/4" rear with 9" brakes and I'm trying to get an 8 1/4" rear with 10" brakes ready to go in the car. The guy at the parts store told me "the parking brake lever is inside the car" even after I described what I was looking for. Frustrating. Thanks for your reply, Nat |
|
| Author: | SlantSixDan [ Tue Feb 19, 2008 8:08 am ] |
| Post subject: | |
Chrysler/Dodge dealer parts: 4882 808 (lever, right) 4882 809 (lever, left) 4761 806 (strut, right) 4761 807 (strut, left) Take the opportunity to install 13/16" bore wheel cylinders in your new 10" rear brakes while you're at it — does a terrific job cleaning up the A-body rear lockup problem. NAPA-United 37696, Raybestos WC37696, Wagner F113704, or ACDelco 18E268 is the wheel cylinder you want — times two (left = right). |
|
| Author: | NewSlanter [ Tue Feb 19, 2008 10:32 am ] |
| Post subject: | |
Thank you sir! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|