| Slant Six Forum https://www.slantsix.org/forum/ |
|
| How to ID year of 8 3/4" rear end https://www.slantsix.org/forum/viewtopic.php?t=27916 |
Page 1 of 1 |
| Author: | wjajr [ Tue Mar 18, 2008 8:46 pm ] |
| Post subject: | How to ID year of 8 3/4" rear end |
Please view my post under brakes for more titilating questions. Tonight I jacked the old Crate up to pull the rear drums, and figured I would check the rear end ratio using one wheel in the air, and count the revolutions of the U joint method. Apparently I have a limmited slip or no-slip, cause that wheel wouldn't turn with the transmission in N. Would the ratio be stamped on the differential assembly somewhere. It is a bit cruddy under her, if I knew where to scrape & rub it would help. |
|
| Author: | Jeffc [ Mon Mar 24, 2008 9:17 am ] |
| Post subject: | |
Very rare to see it stamped from the factory, most often if it has not been taken apart it will be on a tag attached to one of the pumkin bolts.... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|