hey black sheep.
is it like this one?
or is it not of Mopar origin you think?
regards,Rod
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Eletric Dizzy Part Numbers https://www.slantsix.org/forum/viewtopic.php?t=28370 |
Page 1 of 1 |
| Author: | the black sheep [ Mon Apr 14, 2008 1:15 am ] |
| Post subject: | Eletric Dizzy Part Numbers |
HEY guys and girls .. and other mopar lovers i just got another ele dizzy .. rare as in austraila its part number is 3690788 it`s got a pressed steel hold down clamp with a cross bolt in it clamping it around the shaft .. the othe numbers on the little tag are 42 9 with a upside down 6 spamped near the screw hole .. cast in to the dizzy case is a raised number 4 ,,,, i would dearly love to know what it`s out of ... yours thanking you in advance .. the balck sheep .... baaa baaa |
|
| Author: | walpolla [ Mon Apr 14, 2008 3:03 am ] |
| Post subject: | |
hey black sheep. is it like this one? or is it not of Mopar origin you think? regards,Rod
|
|
| Author: | the black sheep [ Mon Apr 14, 2008 4:10 am ] |
| Post subject: | re: dizzy |
hey .. another another austrailan .. wow great picture .. but mine is eletric ignition and does not have a vac can on it as yet .. the one on there was no good .. it got a clamp o it kinda like a bosch style austraillan dizzy the pinches on to the body of the dizzy ... if you want you can e mail me at tool318@yahoo.com .. the black sheep..... in austraila .. with ozzie beer ,, |
|
| Author: | walpolla [ Mon Apr 14, 2008 4:38 am ] |
| Post subject: | |
that distributor is for electronic ignition and is the one now in my slant. imported from US by one of the vendors on Mopar Market.com. teamed with a Bosch BIM 024 module to switch it all it is a great set-up. if you are looking for replacement vac cans,you have a company right on your back door at Caboolture that does a really good change over service. talk to Mike or Tracy .here is a link to their website. http://www.advancediaphragmoptions.com/index.html I will send you some pics and info about my VC and its history by email. maybe not tonight though. regards,Rod
|
|
| Author: | the black sheep [ Mon Apr 14, 2008 11:55 pm ] |
| Post subject: | Re:vacum Cans |
HEY WOLPA thanks heaps i`ve got a few early slant ones the need fixing i was going to learn about doing it my slef but these guy are so close and sound good... i was trying to find out what sort of advance curve the dizzy has in it at the moment i an unnign a dizzy out of a 1974 4 speed duster .. no bad but i think the adance is a little to stiff .. what sort of base timming are you set at now i find i can nly runn at about 5-7` before i get pinging .. yours the black sheep |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|